Like many of the previous posts, Carl was also the first to welcome me to the forum and help answer questions I had. He certainly made me feel a part of this community and I'll miss his posts, his humor and his encouragement!
I hope to see you in heaven, Carl!
Search found 314 matches
- Wed Jan 18, 2017 12:42 pm
- Forum: General Announcments
- Topic: Sad day guys - Eaglezsoar has left us
- Replies: 34
- Views: 71950
- Thu Jan 07, 2016 12:23 pm
- Forum: Heated Bed How-To's
- Topic: Faster Heated Bed
- Replies: 124
- Views: 121873
Re: Faster Heated Bed
I'm using a D1D40.
- Tue May 05, 2015 12:16 am
- Forum: Heated Bed How-To's
- Topic: Faster Heated Bed
- Replies: 124
- Views: 121873
Re: Faster Heated Bed
After posting my reply, I went out and searched on how to hook up a DC-DC relay and found this: http://www.crydom.com/en/tech/tips/dc%20relays-technical%20guidelines.pdf which seems to indicate that the SSR can be either on the + side or - side of the load. However, for me it didn't work when I had ...
- Mon May 04, 2015 11:49 pm
- Forum: Heated Bed How-To's
- Topic: Faster Heated Bed
- Replies: 124
- Views: 121873
Re: Faster Heated Bed
Correct. I know it sounds strange, but that's the way it worksTincho85 wrote:So insted of interrupting the + you are interrupting the - with the SSR?
- Mon May 04, 2015 1:06 pm
- Forum: Heated Bed How-To's
- Topic: Faster Heated Bed
- Replies: 124
- Views: 121873
Re: Faster Heated Bed
I'm kinda scared to do the 24v update. So please, excuse the silly question, but why does my SSR have different outputs? Both will handle a + load so... does it matter where to connect the + psu or the + bed? rpress SSR (Albertus Magnus thread http://forum.seemecnc.com/viewtopic.php?f=42&t=6539...
- Mon May 04, 2015 1:04 pm
- Forum: Heated Bed How-To's
- Topic: Faster Heated Bed
- Replies: 124
- Views: 121873
Re: Faster Heated Bed
I'm kinda scared to do the 24v update. So please, excuse the silly question, but why does my SSR have different outputs? Both will handle a + load so... does it matter where to connect the + psu or the + bed? rpress SSR (Albertus Magnus thread http://forum.seemecnc.com/viewtopic.php?f=42&t=6539...
- Wed Apr 01, 2015 12:18 am
- Forum: Heated Bed How-To's
- Topic: Faster Heated Bed
- Replies: 124
- Views: 121873
Re: Faster Heated Bed
I'm using a Crydom D1D40 and it's working great (I got mine for $15 off ebay which was a SUPER bargain). My heatsink is just a 1/4" piece of aluminum plate although it doesn't get hot at all (I can touch it without even noticing a temperature delta while the bed is heating). I go from 20c to 1...
- Tue Mar 31, 2015 12:27 pm
- Forum: Heated Bed How-To's
- Topic: Faster Heated Bed
- Replies: 124
- Views: 121873
Re: Faster Heated Bed
IF it doesn't work I wont buy a Fotek again. Would this one work? http://www.ebay.com/itm/CRYDOM-SOLID-STATE-RELAY-3-5v-TO-32v-40-AMP-DC-D1D40-/161606229870?hash=item25a07b5f6e&vxp=mtr#shpCntId Just want to have a good alt option. Thanks for your feedback. I'm using a Crydom D1D40 and it's work...
- Mon Mar 30, 2015 1:45 pm
- Forum: The Lounge
- Topic: Tiko 3D
- Replies: 25
- Views: 14880
Tiko 3D
Anyone seen this (or backed it)? https://www.kickstarter.com/projects/1056329519/tiko-the-unibody-3d-printer?ref=nav_search The "Early Bird" versions ($139 + shipping) are going quickly but I haven't decided if I want to experiment with another crowd-funded project or not :-P I think I'm g...
- Mon Mar 23, 2015 7:34 pm
- Forum: Troubleshooting
- Topic: Despirately looking for PTC Connectors
- Replies: 9
- Views: 6467
Re: Despirately looking for PTC Connectors
And the fates are having a good laugh at my expense After leaving the Post Office's facility in Fort Wayne IN, 4 days ago, it finally showed up in the Detroit Area. Of course I had purchased a replacement set yesterday. Of Course the Original set will be delivered 24hrs before the replacement set. ...
- Fri Mar 20, 2015 5:42 pm
- Forum: The Build Zone
- Topic: Introducing: Albertus Magnus
- Replies: 89
- Views: 60428
Re: Introducing: Albertus Magnus
Hi folks, I got all of the parts to put together 24v heating for my bed, including a Crydom D1D40 SSR (I figured I'd spend the money to get a good quality SSR). However, after hooking everything up, the SSR doesn't seem to be functioning correctly -- it let's the 24V go through immediately. I've eve...
- Wed Mar 11, 2015 12:30 pm
- Forum: The Build Zone
- Topic: Introducing: Albertus Magnus
- Replies: 89
- Views: 60428
Re: Introducing: Albertus Magnus
Thanks!nitewatchman wrote:My printer is setup exactly like this also. Rambo does not require 5vdc.
Good luck, mine works very well.
- Wed Mar 11, 2015 12:33 am
- Forum: The Build Zone
- Topic: Introducing: Albertus Magnus
- Replies: 89
- Views: 60428
Re: Introducing: Albertus Magnus
First up is the 24V power supply. In lieu of using the provided 12V ATX supply, I have opted for a supply capable of providing the voltage and current needed to heat the bed quickly. [img]https://lh6.googleusercontent.com/-CbDtKW8kj5M/VDGQY4X5gmI/AAAAAAAAAX8/d9lNKGZ4gf0/s720/IMG_20141001_153842.jpg...
- Mon Mar 09, 2015 4:30 pm
- Forum: Rostock MAX
- Topic: Dual Extruders through one hot-end?
- Replies: 4
- Views: 3960
Re: Dual Extruders through one hot-end?
Thanks, Guys!
MHackney, I've considered the Cyclops as well but wanted to give the whole idea a try before spending $$$ on a new hot-end.
Generic Default, the second topic you linked is the one I was looking for but couldn't find! Thanks!
MHackney, I've considered the Cyclops as well but wanted to give the whole idea a try before spending $$$ on a new hot-end.
Generic Default, the second topic you linked is the one I was looking for but couldn't find! Thanks!
- Fri Mar 06, 2015 4:04 pm
- Forum: Rostock MAX
- Topic: Dual Extruders through one hot-end?
- Replies: 4
- Views: 3960
Dual Extruders through one hot-end?
Hi guys, I remember seeing a post but can't for the life of me find it. Someone had created a part that joined two bowden tubes into one which would allow you to feed two filaments into one hot-end. It's a way to "switch" filaments by retracting one past the split and then feeding in the o...
- Thu Feb 05, 2015 6:38 pm
- Forum: General Tips 'N Tricks
- Topic: Experimental gcode auto Z compensation ready to test...
- Replies: 81
- Views: 36979
Re: Experimental gcode auto Z compensation ready to test...
Heh, I saw that one, too, but the flat end turned me off (I mean, you can't go wrong for < $10, but still) I'll post up my script so far when I get home. I added a function to generate a 3d scatterplot of the buildplate with z-compensation added, so you can see what the buildplate looks like in ter...
- Thu Feb 05, 2015 4:49 pm
- Forum: General Tips 'N Tricks
- Topic: Experimental gcode auto Z compensation ready to test...
- Replies: 81
- Views: 36979
Re: Experimental gcode auto Z compensation ready to test...
After reading this thread and finding this article: http://www.robotroom.com/Digital-Indicator-1.html I went ahead and ordered the BG Micro digital indicator. I have no idea how well (or not) it will work but figured I'd attach it to my effector and take a stab at writing an auto-sampling routine. T...
- Thu Feb 05, 2015 4:45 pm
- Forum: The Lounge
- Topic: Why I am staying on the Forum
- Replies: 51
- Views: 23989
Re: Why I am leaving the Forum
Eagleszoar, I was sad to hear you were leaving but glad to hear you've changed your mind after reading the posts from your fellow forum members. I haven't been very active with my printer in the last 9 months or so, but you were the first to welcome me to the forum and I'll never forget that! At tim...
- Tue Sep 30, 2014 12:03 pm
- Forum: Rostock MAX
- Topic: Heating 2nd nozzle requires heating 1st nozzle?
- Replies: 10
- Views: 8304
Re: Heating 2nd nozzle requires heating 1st nozzle?
Last time I looked at it, the SeeMeCNC firmware 0.91 used the "Heat 1" connector on the RAMBO board for the Hot-End cooling fan. In configuration.h, it's this line: #define EXT0_EXTRUDER_COOLER_PIN 7 That "7" is for the HEAT1 according to the RAMBO documentation. For dual extrude...
- Tue May 06, 2014 6:41 pm
- Forum: Rostock MAX
- Topic: Anyone used an RMax for engraving?
- Replies: 2
- Views: 2530
Re: Anyone used an RMax for engraving?
There's already been a thread on this: http://forum.seemecnc.com/viewtopic.php?t=2529&p=18902. Conclusion is basically it's a bad idea
- Tue May 06, 2014 6:38 pm
- Forum: Rostock MAX v2
- Topic: HotEnd Resistors Silicone Alternative ??!?
- Replies: 20
- Views: 12366
Re: HotEnd Resistors Silicone Alternative ??!?
The whole special thing about it is it has particles of copper embedded in the silicone to better conduct heat. I, like you, was unable to find some with copper, so I just used some high temp silicone and it worked well enough for me. It does NOT contain copper -- that's just the color :-). The mai...
- Mon Apr 28, 2014 6:23 pm
- Forum: The Lounge
- Topic: A John Oly caption that photo contest :)
- Replies: 37
- Views: 19401
Re: A John Oly caption that photo contest :)
"This is a prototype bolt for our self-assembly of our next printer: the Rostock MaxZilla".
- Mon Apr 28, 2014 5:18 pm
- Forum: The Lounge
- Topic: A John Oly caption that photo contest :)
- Replies: 37
- Views: 19401
Re: A John Oly caption that photo contest :)
"Our machines are easily built by the visually impaired"
- Thu Apr 24, 2014 2:14 am
- Forum: General Tips 'N Tricks
- Topic: Splitting parts to avoid support
- Replies: 15
- Views: 9713
Re: Splitting parts to avoid support
This is Slic3r 1.0.0 x64, and Repetier-host V.95F on windows 7 x64. You say you used the Z adjustment. Where do you do that? I used the Z translation box on the object placement tab where I put in a number that aligned where I wanted it to start with the bed. Which it then ignored, because you can ...
- Wed Apr 23, 2014 8:05 pm
- Forum: General Tips 'N Tricks
- Topic: Splitting parts to avoid support
- Replies: 15
- Views: 9713
Re: Splitting parts to avoid support
I printed a horse from Thingiverse that wasn't split. Basically, I just rotated it and sunk it down into the print-bed in RH and slicer sliced it just fine (the negative Z stuff didn't show up in the G-code). (SNIP) I am trying to print a model of a PCB, that has parts on both sides. I made the boa...