EZStruder is not supposed to be here till Friday...
I had time last night so I worked on the Steve's Extruder and I think it might work now. We will see. I have class tonight so I won't be able to work on it again till Thursday...
So many things to print!!
Search found 44 matches
- Wed Jan 15, 2014 7:32 pm
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
- Tue Jan 14, 2014 6:58 pm
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
OK, so...
Still waiting on my EZStruder. Haven't even touched the Steve's as there is no point now. Anyone want it, PM me.
Good news is that UltiMachine finally got back to me and they are picking up the old board, so I am not out anything there anymore.
Can't....
Wait....
To print....
Still waiting on my EZStruder. Haven't even touched the Steve's as there is no point now. Anyone want it, PM me.
Good news is that UltiMachine finally got back to me and they are picking up the old board, so I am not out anything there anymore.
Can't....
Wait....
To print....
- Sun Jan 12, 2014 2:26 pm
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
Got the new Rambo in and everything works now, I will be trying to send back the old board for a replacement. Tried to extrude some filament with the hotend heated up and it got jammed in the nozzle. Took it apart and it seems the new tip needs a lot of the tubing taken off. Did that and everything ...
- Wed Jan 08, 2014 4:54 pm
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
You da man! Or Eagle? PM replying. I bought the http://www.youtube.com/watch?v=xvXKt3xDt4E" onclick="window.open(this.href);return false; upgrades. I will be trying the "new" hotend soon. I also got a new Rambo V1.2 to see if that is the issue.... I checked it on the machine from...
- Mon Jan 06, 2014 2:03 pm
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
Done! I am DONE... I have reached my DIY limit. I would like to offer some $$ for anyone who is in the Los Angles , CA or Orange County area who wouldn't mind letting me bring over my printer for them to work on/get up and running. I will pay for parts and labor ($$ to be discussed). Please PM me if...
- Tue Dec 31, 2013 7:22 pm
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
I checked it on the machine from where it would connect to the board as well if that's what you are asking. Still same resistance.... Thanks for all the help Eaglezsoar. I'm thinking I may have crapped out the board. What else would explain this crazyness? Also I checked the fuse too. It's possible ...
- Tue Dec 31, 2013 6:24 pm
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
OK, so..... When I run the thermistor it does not work (only ever shows a reading of 0.00*C on setting 97 in the firmware, it only seems to work on 1 (gets 24*C, although I have not tried other numbers). I tried other thermistors ( I have one for the bed and I have a threaded one I wanted to replace...
- Fri Dec 27, 2013 4:26 pm
- Forum: The Build Zone
- Topic: Another rostock max build
- Replies: 414
- Views: 211175
Re: Another rostock max build
Expensive i know...
https://www.youtube.com/watch?v=ylOQq_n ... ata_player" onclick="window.open(this.href);return false;
https://www.youtube.com/watch?v=ylOQq_n ... ata_player" onclick="window.open(this.href);return false;
- Thu Dec 26, 2013 7:12 pm
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
Thanks for all the help and quick replies, I will finish this damn thing if it takes forever....!
I will trace the issue and see if it resides in line. If it does not I will look at my firmware.
I will trace the issue and see if it resides in line. If it does not I will look at my firmware.
- Thu Dec 26, 2013 5:52 pm
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
I am using this multimeter. The setting I am on is "200k". Gardner-Bender-GDT-3190-2.jpg I was incorrect in saying I got 109 at 200k, it was set to 2000k for that reading. When heated the thermistor resistance goes down steadily. I have the one that was for the print bed (I have not used i...
- Thu Dec 26, 2013 5:03 pm
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
Well, everything is going great. Printer is fake printing all sorts of stuff. However I did not have the right filament as of late. I now have some 1.75 ABS and got ready to heat up the hotend and... nothing. I had run the PID calibration before and the temp went up and stabilized and everything was...
- Thu Dec 26, 2013 4:54 pm
- Forum: Rostock MAX
- Topic: Hot End Issues
- Replies: 11
- Views: 7124
Re: Hot End Issues
I know this is old, however, update?
- Fri Dec 20, 2013 10:44 am
- Forum: The Build Zone
- Topic: Another rostock max build
- Replies: 414
- Views: 211175
Re: Another rostock max build
Bump for update!
- Thu Dec 19, 2013 6:26 pm
- Forum: Rostock MAX Official Docs
- Topic: [NEW! 12Feb14] Rostock MAX Assembly Manual
- Replies: 174
- Views: 235826
Re: [NEW! 18Dec13] Rostock MAX Assembly Manual
Understood, sorry to offend. I will abandon the project. There is no "they". There is only "me". This is not a format I'm at all interested in pursuing. From what I've been told, there will be no further major changes to the included part set. If there is, it will likely spawn a ...
- Thu Dec 19, 2013 5:53 pm
- Forum: Rostock MAX Official Docs
- Topic: [NEW! 12Feb14] Rostock MAX Assembly Manual
- Replies: 174
- Views: 235826
Re: [NEW! 18Dec13] Rostock MAX Assembly Manual
I am attempting to technofy this long and a little complicated or wrong (as it applies to updated items) manual. I have started an HTML file that shows what I think will be a far superior method. At each junction it will have an option and a picture asking, "Click on the kind of (blank) you hav...
- Thu Dec 19, 2013 2:47 pm
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
Everything is going fine, I just need to adjust the z height then I will be able to be printing here probably in the next couple days if I have time. EDIT: Correction, I will be able to start fiddling with the extruder and all the other little settings that will allow me to print something useful. H...
- Thu Dec 19, 2013 2:10 pm
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
I am really having a hard time justifying spending any more money on this "kit" since it was sold to me as a functioning printer. I upgraded the arms because I did not want to spend the time to "calibrate" the stock ones myself. I have not even printed anything yet. If the smalle...
- Thu Dec 19, 2013 10:20 am
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
Pppbsh, I wish. I had maybe about 10 min last night to tinker, the GF was wondering why it was taking me so long to "brush my teeth", lol. So the steps per MM seem to be better now. I figured out the EEPROM thing and was fiddling with that as well. I need to measure the run and make sure 5...
- Wed Dec 18, 2013 8:52 pm
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
Where is that? Per the link, the Eprom will get you every time. Turn the eprom off when you update the steps per mm by setting it to 0 when you copy the new configuration over then set the eprom to 1 and upload again. Or you could try the M500 which sometimes does not work per what I have read. Edit...
- Wed Dec 18, 2013 8:48 pm
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
NICE, I will try that! Thanks!
- Wed Dec 18, 2013 8:26 pm
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
Yep, it's the one on the left. It seems to me that the issue I am seeing is slightly because of the fact the Rambo thinks I am going further than I am and it cuts me off, 360mm only being 310 or whatever. That is why I think the "teeth" are screwed up or something, but I changed them? Is t...
- Wed Dec 18, 2013 8:08 pm
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
These are not my kind. Mine do not have the shoulders on them, they are the all aluminum with the big a$$ screw, not the grub.
- Wed Dec 18, 2013 7:23 pm
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
Want
To
Print
So
Bad...
To
So
Bad...
- Wed Dec 18, 2013 12:07 am
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
Hokay, so.... Here is my newest issues... Everything got better with the firmware. Except now it wont go lower than this anymore (about 50mm). Before the Firmware fix I could tell Repetier Go z-(whatever) and it would oblige. It ignores me now. IMG_20131217_193002_422.jpg This on the Repetier says i...
- Mon Dec 16, 2013 10:50 am
- Forum: Troubleshooting
- Topic: Calibration issues
- Replies: 44
- Views: 21592
Re: Calibration issues
Is Marlin a firmware? That would make sense then.