Welcome to the SeeMeCNC Community

Thanks for the replies. One other possibility is to use one 24VDC power supply that feeds the bed via the SSR and also goes to a 24VDC to 12VDC converter for the Rambo card. This would require much less space and generate less heat than using 2 power supplies internal to the base. I already have the ...

I want to mount two power supplies, one YHG 12v 30A and one Meanwell 24v 25A (SE-600-24), along with a SSR & heatsink, in the base of my Rostock MAX v1. I have removed the original power supply and retainer plate. The Meanwell is too long to fit comfortably into one of the three compartments. I'm ...

I recently bought an uncompleted Rostock Max kit that was missing a few parts. I found 1/4" 2-sided melamine MDF locally in the SF Bay Area at Macbeath Hardwoods in Berkeley for under $30 for a 4'x8' sheet. Unfortunately, my old 25W New Hermes (ULS) laser engraver couldn't get through it, even with ...