Search found 1383 matches

by Mac The Knife
Wed Sep 16, 2020 9:31 pm
Forum: Fusion 360
Topic: Arc Recognition, G2/G3 now activated
Replies: 1
Views: 5

Re: Arc Recognition, G2/G3 now activated

It does not appear to do Arc fitting to stl files, It will generate G2s when using spherical infill. It's still early yet. MeshCAM figured out how to do that, but it did take a few versions before Robert figured it out.
by Mac The Knife
Wed Sep 16, 2020 8:32 am
Forum: Fusion 360
Topic: Arc Recognition, G2/G3 now activated
Replies: 1
Views: 5

Arc Recognition, G2/G3 now activated

Well, activated for just a few printer posts. Currently Prusa, RepRap, Bigrep, and the Autodesk Generic FFF post. I modeled a test piece in Fusion, a 3" cylinder, 1" tall, with 3, 1" holes. The file size with normal slice settings was 17.5 Mb. After checking all of the appropriate boxes to activate ...
by Mac The Knife
Fri Sep 11, 2020 7:45 am
Forum: Troubleshooting
Topic: Printing way off-center
Replies: 2
Views: 31

Re: Printing way off-center

This test cube, is it a file provided by SeeMeCNC, or one that you created? If it is one that you created, it sounds like the slicer programs settings are wrong.
by Mac The Knife
Fri Aug 21, 2020 8:05 am
Forum: Troubleshooting
Topic: Error compiling for board Arduino/Genuino Mega or Mega 2560.
Replies: 1
Views: 58

Re: Error compiling for board Arduino/Genuino Mega or Mega 2560.

Did you use Arduino IDE 1.6.0? Anything newer then that won't work,,,,, https://seemecnc.dozuki.com/Guide/RAMBo+Control+Firmware/50?lang=en
by Mac The Knife
Thu Aug 20, 2020 7:56 am
Forum: Fusion 360
Topic: Slicing with F360
Replies: 5
Views: 180

Re: Slicing with F360

Autodesk had just released the 3D printing capability just a few months ago, so the availability of a setup for the SeeMeCNC machines are nil. I played with the module a couple times to check out the interesting infills that they offer, but at initial release it was not quite there. I'll have to try...
by Mac The Knife
Wed Jun 03, 2020 8:12 am
Forum: Troubleshooting
Topic: Max V2 - Printing Above Bed
Replies: 9
Views: 592

Re: Max V2 - Printing Above Bed

What is your V2 using for a probe? Secondly, I'm not a fan of mattercontrol, so it would be to easy to say that's the problem,,, although I do recall they had a problem with their "auto calibrate" feature at one time. I have a V2, and never bothered with installing a probe to be able to auto calibra...
by Mac The Knife
Tue Jun 02, 2020 12:19 pm
Forum: Troubleshooting
Topic: Lots of issues with PETG
Replies: 21
Views: 1375

Re: Lots of issues with PETG

My default starting temperature for petg is 250.
by Mac The Knife
Fri Mar 20, 2020 8:31 am
Forum: Fusion 360
Topic: A little rough, but,,,,,
Replies: 0
Views: 1158

A little rough, but,,,,,

They had to start somewhere. Also, reading the comments for the video, the Fusion 360 team appears to be monitoring the comments, and fixing things on the fly.


https://youtu.be/QWFRh-MdKxo
by Mac The Knife
Mon Feb 17, 2020 8:11 am
Forum: The Lounge
Topic: Forums looking shoddy,,
Replies: 7
Views: 900

Re: Forums looking shoddy,,

All better now. Thanks!!
by Mac The Knife
Sun Feb 16, 2020 10:02 am
Forum: The Lounge
Topic: Forums looking shoddy,,
Replies: 7
Views: 900

Re: Forums looking shoddy,,

I found MY problem,,,, It seems whomever did the "maintenance" on the forum, blew away the "Digi" themes for the board styles? My only option now is "pro"silver?
by Mac The Knife
Thu Feb 13, 2020 7:38 am
Forum: The Lounge
Topic: Forums looking shoddy,,
Replies: 7
Views: 900

Forums looking shoddy,,

Kind of like when a radio station plays the same song, 24/7 before they do a format change.
by Mac The Knife
Mon Dec 16, 2019 12:23 pm
Forum: Troubleshooting
Topic: Max v2 issue with peaks and valleys in bed map[NEW DATA]
Replies: 58
Views: 5836

Re: Max v2 issue with peaks and valleys in bed map[NEW DATA]

I would just want all three to be pretty close to the same frequency.
by Mac The Knife
Mon Dec 16, 2019 8:15 am
Forum: Troubleshooting
Topic: Max v2 issue with peaks and valleys in bed map[NEW DATA]
Replies: 58
Views: 5836

Re: Max v2 issue with peaks and valleys in bed map[NEW DATA]

For belt tensioning, I had considered using a guitar tuner app om my phone, to adjust tension,,,,,, Just never got around to it.
by Mac The Knife
Tue Dec 10, 2019 8:11 am
Forum: New Member introduction
Topic: Hey from VA
Replies: 5
Views: 1133

Re: Hey from VA

" In general, I think the quality of the printer has underperformed a bit for the price, and being billed as a "ready to print" printer." Like anything else, you are expected to have some experience. Most of us here built our printers from a kit, so yeah, the Artemis is "Ready to Print". If you trul...
by Mac The Knife
Mon Oct 07, 2019 8:13 am
Forum: General Tips 'N Tricks
Topic: Printing clear PETG
Replies: 4
Views: 1627

Re: Printing clear PETG

Print really slow,,,, but it will still not be transparent,
by Mac The Knife
Mon Sep 30, 2019 8:21 am
Forum: Troubleshooting
Topic: Rostock V4 - SE300 - Barrel fan not working.
Replies: 9
Views: 1396

Re: Rostock V4 - SE300 - Barrel fan not working.

Test the connections for the fan,,,,,,,,,
by Mac The Knife
Wed Aug 07, 2019 7:32 am
Forum: Rostock MAX v4
Topic: Ghosting on vertical surfaces
Replies: 13
Views: 1748

Re: Ghosting on vertical surfaces

It won't be as bad as you think, Just don't get carried away and take it all apart. : )
by Mac The Knife
Tue Aug 06, 2019 7:31 am
Forum: Rostock MAX v3
Topic: BuildTak mounting on Max V3?
Replies: 1
Views: 1812

Re: BuildTak mounting on Max V3?

By avoiding the clips when positioning the print in the slicer program.
by Mac The Knife
Thu Aug 01, 2019 7:35 am
Forum: Rostock MAX v2
Topic: Rostock MAX v2 Print not smooth
Replies: 9
Views: 1481

Re: Rostock MAX v2 Print not smooth

Motor pulley setscrews starting to come loose maybe?
by Mac The Knife
Mon Jul 22, 2019 12:12 pm
Forum: Troubleshooting
Topic: Max v2 issue with peaks and valleys in bed map[NEW DATA]
Replies: 58
Views: 5836

Re: Max v2 issue with peaks and valleys in bed map[NEW DATA]

"Yes, just have first layer issues further out near the edges of the bed"
On my RMv2, I blamed that on tower rotation changes, and blamed it on humidity changes.
by Mac The Knife
Fri Jul 12, 2019 7:24 am
Forum: Artemis
Topic: sudden under-voltage barrage.
Replies: 4
Views: 1299

Re: sudden under-voltage barrage.

Power supply is prolly going out.
by Mac The Knife
Tue Jun 18, 2019 12:24 pm
Forum: Troubleshooting
Topic: EZR Struder clicking
Replies: 3
Views: 921

Re: EZR Struder clicking

I assume you re-used the stepper motors from the printers, for the new extruders. With both printers in the same room, I would compare the extruder motor temperature on each one,,,,, if the one that is skipping is cooler than the other one, I'd bump up the current some more.
by Mac The Knife
Mon Jun 10, 2019 1:44 pm
Forum: The Lounge
Topic: Scorpius™?
Replies: 2
Views: 1340

Re: Scorpius™?

I suspect it's a replacement for the Orion.

Go to advanced search