Welcome to the SeeMeCNC Community

Hi, Since the original spool holder has a fair bit of lag to it, and are not the best, we thought we would share our spool holder. It's not a work of art, but it works really great. If anyone wants it, please feel free to download it at: http://www.thingiverse.com/thing:1324360" onclick="w...

Thanks for the setup, it's working like a charm

Did anyone manage to get the dual extruder setup to work? This looks like a really nice design

Thank you Earthbound, your guide is very good. I didn't look at it untill after i talked to Seemecnc support. It's basicly the same, but i pasted the straight forward E0 - E1

Thank you. If anyone experience the same problem. And want to change output from E0 to E1 Here is what Seemecnc told me to do (and it worked great) 1.Open Repetier.ino (with arduino software) 2. Go to line 1491 in pins.h 3. Swap E0 and E1 pin values. Stock looks like this: #define E0_STEP_PIN 34 #de...

Yes, i even tried to flash it and uploading the newest repetier firmware. (From seemecnc website). No difference at all. I am trying to see if the E1 port (E0 is standard for ext.1) act different. But im not sure what to change in the firmware or EEprom? Do you know ? I just want to check if its onl...

Hi all. I currently have two Rostock max v2 printers, one black and one white, the black printer is the oldest one, its about 3-4 months and has 5 days of print time in total according to the reprapdiscount lcd. I have had different problems with the black rostock max v2. I replaced the power supply...

I have the same issue. No fix yet? i just lost an 36 hour print because of the pause button..

No one who is familiar with this problem ? I'm afraid my extruder motor stops working because of the heat.

Thanks guys! Haha, i got many 3d-printers so time doesn't matter! But i really love the Rostock max V2 ! I like to take things to the limit, and really want make a prints as big as possible.

Hi, i thinkin of extending the T-slots, to get more Z hight and larger build area. I know this will some how affect the precision of the printer. But, have anyone tried that? How much can i extend it before it affects the print quality?

Thanks

I got the same problem, but i have the wantai stepper motors, any suggestions? Its getting really hot during a print!

Thanks, do you have a link to the parts you are using ?

Also, my other 3d printer, a robo3d had simular issues, but the reason why it shut off (the robo) was to bad cooling to the ardiuino board. Is the tiny fan on the back side enough to cool the rambo ?

I will get a replacement from SeemeCNC, great service But are these psu's bad? Do you suggest buy another one? Link?

Thanks, I already tried disassambling the acrylics and the side plates. Still the same issue :/

Hi, after assambling my rostock max v2 everything works great, it prints perfectly and everything is calibrated right, with amazing results. But when i try to print medium size objects( abs with heatbed to 90dgr) (not very large) the printer shuts down during a print. It just cuts the power. And the...