Welcome to the SeeMeCNC Community

First off, Thank You for all the information on converting to the Duet Wifi controller board on the Rostock Max printers. I was making use of all the information here to get my Black Max converted over this weekend. Problem one: The FSR LED lights on the adaptor board worked when I pressed on the he...

I printed out replacement knobs from Thingiverse model: http://www.thingiverse.com/thing:185209

They are used on the harbor freight A/C charging kit.

I found this youtube video on Hobbing with a lathe... for reference.

https://www.youtube.com/watch?v=ijgzBlRF8T8

I am still in the process of making an acoustic guitar on my 3D printer. Very time consuming… http://www.thingiverse.com/make:150456" onclick="window.open(this.href);return false; Guitar2.JPG From LoboCNC Acoustic Guitar design on Thingiverse… http://www.thingiverse.com/thing:710561" ...

Buying a Bondtech QR is the quickest solution, but costly. I have access to a full shop, lathe and mill, torches for heat treating. As the picture of my top board shows, laser cutting also. I think the geared stepper with dual gear extrusion is the way to go, and I have four extruders to make so far...

Welcome, I hope you are able post some pics of your progress.

Very cool, thanks for sharing.

As I Modify my top assembly to add twin towers and dual extruders, I have searched for parts to make my EZstruder drive with two geared stepper motors and now I'm looking to replace the roller bearing for the filament drive to a dual gear drive. I think I found all the parts on Amazon.com Top.JPG Tw...

Not using the wedges will save you a step in the future if you add more wires; I had to modify my wedges with a hole so I can run additional wires up the cheapskate channel slots for a second hotend and stepper motor cables for dual head printing. I am using plastic banding strips from packages to c...

I noticed that the link above to Michael Weinberg's blog is the same guy that has a paper written on this subject. It was part of a petitioned to the supreme court recently for a ruling for copy rights and includes 3D printed rights. After reflecting on this I know I have used numerous parts found o...

... Also, I doubt just-3d-print guy is making any significant amount of money on this... I'd be honored if he were selling a model of mine that I had released freely. They may have... Just3dprint has listed and sold hundreds so far. edit: I just checked, it looks like bot doesn't have any items on ...

I did read one of their responses stating ebay will not allow posting links. I saw someone create just3dprinted login and post the same item with crediting where the file came from and who created it. They go on to bash just3dprint for not following the practice and list the part for $.99

When I clicked on the CC license from this item on THingiverse it stated: You are free to: Share — copy and redistribute the material in any medium or format Adapt — remix, transform, and build upon the material for any purpose, even commercially. The licensor cannot revoke these freedoms as long as...

The creator of the sad face loubie has her comments covering her steps on removing this from ebay.

http://www.thingiverse.com/thing:1350837/#comments" onclick="window.open(this.href);return false;

There is a disturbance in the force... http://michaelweinberg.org/post/139675844685/the-plight-of-thing-1350837-continued Just 3D Print is pulling items off of thingiverse.com and selling a printed item without stating it is designed by someone else, for profit. The link above is to Michael Weinberg...

Liking the new panel, I see some more upgrades for my Black Max in the near future. How long was the printer down to install the Dual controller card?

It looks like your temp is too high. There is a great thread on this, calibration pyramid challenge. It has a lot of information on it.

http://forum.seemecnc.com/viewtopic.php ... enge#p6591" onclick="window.open(this.href);return false;

I had the Peek fan cool the hotend while printing, so I now wrap F4 tape on the hotend. You could use kapton tape also.

Thanks for the post Brian, I purchased the geared stepper motor and Look forward to getting better PLA printing from my E3D hotends.

In the military I think we called it F4 tape. http://www.f4tape.com/" onclick="window.open(this.href);return false; It is silicone heat tape the sticks to itself. It is for protection against fans cooling the hotend plus radiant heat melting the plastic above it. I get better heat control ...

Installed my magnetic arm last night. I only connected my E3D v6 head, the wiring for dual head isn't completed yet.

Life with zero backlash. I am excited.

My printer stop working with the laptop a few weeks ago but I could run it from a SD card. It turned out to be a windows update. I used an older computer and it worked ok; I went back to an older version of window to fix the communication issue.

I found someone selling excess 3/8 chrome plated steel ball that have a screw base on the Google forum.
https://groups.google.com/forum/#!topic ... 85cfVFrFFU" onclick="window.open(this.href);return false;[1-25]

I found someone selling excess 3/8 chrome plated steel ball that have a screw base on the Google forum. I just bought 24 for $28 including shipping... He is still selling them if anyone is looking to do this mod… https://groups.google.com/forum/#!topic/deltabot/485cfVFrFFU" onclick="window...