Welcome to the SeeMeCNC Community

Hi all. In my previous post I wrote that my firmware had changed to 091S after Trying to fix my printer when the whole thing went crazy trying to Home the towers. Can someone please tell me the best way to update firmware. It seems I can't change to repetier 0.91 on an Orion delta seeme cnc Printer ...

Ok I've discovered what PID is

I'm using Matter Control and I've ran the command

M303 E0 S230

It's got all the way to 175c and is now cooling down again.

Not hitting above 200c

Hi Teoman. Thanks for your reply. It seems that I can only reach 190c on hot end where as before it would reach 230c no problem and quite quickly too. Because I have changed the firmware I'm guessing its the values that have changed and is causing this. I'm afraid I'm very new to this and I've not ...

Hi all. HELP!! Had my V1 orion printer for approx 6 months now. I switched it on one day and the z axis went a bit haywire and so I thought I'd update the firmware. Got it all working again except for..... It now reads 091S when switched on (used to say Repetier 0.91) and the temperatures are set to ...