Search found 15 matches

by HighDangerr
Tue Feb 23, 2016 3:03 am
Forum: Troubleshooting
Topic: Chimera is not aligned
Replies: 6
Views: 4303

Re: Chimera is not aligned

its in your firmware, might even be in the eeprom that sets the distance. I wrote up a guide to using the chimera a while back, do a search for it. I used the guide from JFettig. and the prints are still not aligned. I find it very strange that this happens. I had it aligned, but the prints slanted...
by HighDangerr
Thu Feb 18, 2016 6:03 am
Forum: Troubleshooting
Topic: Chimera is not aligned
Replies: 6
Views: 4303

Chimera is not aligned

hi, I am almost done with my 3d printer on school. but i have only one problem I have a chimera printhead. [img]http://imgur.com/q2K42Vz[/img] http://imgur.com/q2K42Vz" onclick="window.open(this.href);return false; On the image you see the print is not aligned. Can anyone help me with this...
by HighDangerr
Fri Jan 22, 2016 4:30 am
Forum: Troubleshooting
Topic: I can't control the second EZstruder
Replies: 3
Views: 2524

Re: I can't control the second EZstruder

thank you for your response.

How do i disable the peek fan in repetier? or move it to fan2.
by HighDangerr
Thu Jan 21, 2016 8:30 am
Forum: Troubleshooting
Topic: I can't control the second EZstruder
Replies: 3
Views: 2524

I can't control the second EZstruder

Hello,

Maybe someone can help me with this problem.
Which pins are used from the rambo board to move the E1 motor. Because the motor doesn't move at all.
Because i am wanting to use 2 extruders.

Kind regards,

HighDangerr
by HighDangerr
Mon Jan 18, 2016 7:50 am
Forum: Troubleshooting
Topic: Problem with PSU!
Replies: 3
Views: 2468

Problem with PSU!

I am making a 3D printer on school. It is a Delta version.

The problem is the psu shuts itself down when the heated bed wants to keep it on 55 degrees. and i can't figure it out what the problem is.
specs:
Rambo Board
450 watt psu
200mm Heated bed.

Can someone help me with this problem?
by HighDangerr
Wed May 20, 2015 10:57 am
Forum: Troubleshooting
Topic: x tower goes sometimes slowly upwards (video link)
Replies: 8
Views: 5053

Re: x tower goes sometimes slowly upwards (video link)

i solved it. it was a end stop issue.
Thank for the help :D

HighDangerr
by HighDangerr
Mon May 18, 2015 7:13 am
Forum: Troubleshooting
Topic: x tower goes sometimes slowly upwards (video link)
Replies: 8
Views: 5053

Re: x tower goes sometimes slowly upwards (video link)

Can somebody pls help me!? i think this has also to do something with the offset from my printer!
by HighDangerr
Sun May 17, 2015 3:41 pm
Forum: Troubleshooting
Topic: x tower goes sometimes slowly upwards (video link)
Replies: 8
Views: 5053

Re: x tower goes sometimes slowly upwards (video link)

Hi guys, My x tower goes sometimes slowly upwards. while the other two already ready! Does any one know what causes this? https://www.youtube.com/watch?v=m3wjJJdtaKs Could be several different things. Does it work from the LCD panel? Does it work from host program? What host program? What firmware ...
by HighDangerr
Sun May 17, 2015 3:39 pm
Forum: Troubleshooting
Topic: x tower goes sometimes slowly upwards (video link)
Replies: 8
Views: 5053

Re: x tower goes sometimes slowly upwards (video link)

i did clear the arduino with eeprom and loaded the software on the board.
But i still get the same problem on the video.
by HighDangerr
Sun May 17, 2015 2:47 pm
Forum: Troubleshooting
Topic: x tower goes sometimes slowly upwards (video link)
Replies: 8
Views: 5053

x tower goes sometimes slowly upwards (video link)

Hi guys,

My x tower goes sometimes slowly upwards. while the other two already ready!
Does any one know what causes this?
https://www.youtube.com/watch?v=m3wjJJdtaKs
by HighDangerr
Sat May 09, 2015 5:18 am
Forum: Troubleshooting
Topic: I need help!
Replies: 4
Views: 2992

Re: I need help!

i've printed it 2 more times. and it didn't fail at the same time.
also when it happens the nozzle is hitting the object.
so i think the nozzle lowers a bit, but i don't know why.
by HighDangerr
Fri May 08, 2015 1:50 pm
Forum: Troubleshooting
Topic: I need help!
Replies: 4
Views: 2992

Re: I need help!

yeah the layers are beginning to offset to one side.
And the part is still anchored to the bed!
i'm printing on blue painters tape
by HighDangerr
Fri May 08, 2015 9:48 am
Forum: Troubleshooting
Topic: I need help!
Replies: 4
Views: 2992

I need help!

Hi guys!

i have a problem with my print :(. after a hour of printing this happens. you see it at the pictures.
http://imageshack.com/a/img540/6686/6HoaPX.jpg
http://imageshack.com/a/img537/5189/LzSQ4u.jpg
Does anyone know what the problem is ? and how i can solve this?
by HighDangerr
Sat Jan 17, 2015 6:04 am
Forum: Troubleshooting
Topic: Need help with stepper motors!
Replies: 3
Views: 2544

Re: Need help with stepper motors!

No, i didn't. but i will try that.
by HighDangerr
Sat Jan 17, 2015 4:27 am
Forum: Troubleshooting
Topic: Need help with stepper motors!
Replies: 3
Views: 2544

Need help with stepper motors!

I have a problem. i have one stepper motor from kysan. and the rest is from wantai.
The one from kysan is getting really hot. And i don't know if its bad for the kysan stepper motor to get so hot.
Can anyone help me?

Go to advanced search