Welcome to the SeeMeCNC Community

An update, sent my machine in to the Awesome crew at Seemecnc and they debugged it and did an awesome job. Turns out the cooling fan for the Rambo board was cooling the bed down and my attempt to place an aluminum sheet on to help spread the heat was causing some shorts on the heated bed, need Kapto...

What is the easiest way to take a 2D file, such as a .pin file, and raise the image to be able to print it?

The light is staying on steady. Checked my heated bed for resistance, 1.6 ohms. The voltage feeding the bed is 10.4 volts. Hmmmm.....

Well, not sure what I did but today it has started up. I pulled the 3 fuses and checked them, all ok, then put them back in. Fired it up and am getting more even heat. Need more heat though, bed gets up to about 60 C and goes no higher, is there a place in the machine settings that holds this back o...

I have created an issue I believe, in trying to even the bed temperature with a piece of aluminum I think it shorted across the +/- leads on the Onyx heated bed. Now I have no power when I flip the switch to turn the machine on. Where/is there a fused link that might have blown or need reset or did ...

Has anyone has success using their web generator? http://3dp.rocks/lithophane/" onclick="window.open(this.href);return false;

Thanks, Rick