Search found 47 matches

by Nareikuk
Tue May 12, 2015 5:18 pm
Forum: Rostock MAX v2
Topic: Success, then frustration
Replies: 10
Views: 6217

Re: Success, then frustration

A clogged nozzle unblocks quickly and effortlessly with a bit of heat applied from a small blow-torch :-) Most of the plastic causing the blockage just runs out and anything left turns to ash and can be washed out with acetone or IPA. The E3D is a great hot end too. The stock hot end also copes just...
by Nareikuk
Fri Apr 24, 2015 4:00 pm
Forum: Rostock MAX v2
Topic: E3DV6 Praise
Replies: 3
Views: 3134

Re: E3DV6 Praise

The jam was all my fault. The praise was that E3D sent me a replacement so quickly. Maybe I should read my posts more carefully - any negatives are all my fault and due to general abuse of my printer.
by Nareikuk
Thu Apr 23, 2015 2:20 pm
Forum: What are YOU making?
Topic: Aluminum and carbon fiber E3d V6 mount. RELEASED!
Replies: 389
Views: 196680

Re: Aluminum and carbon fiber E3d V6 mount.

Please put me down for a mount if not already on the list.
by Nareikuk
Thu Apr 23, 2015 2:16 pm
Forum: Rostock MAX v2
Topic: E3DV6 Praise
Replies: 3
Views: 3134

E3DV6 Praise

I tried some printing in a flexible filament which didn't really work too well for a number of reasons. A day later I was printing a large 29+ hour print in ABS which was required in a hurry. The head jammed. I removed the jam, printed again in PLA and it jammed too. I took the E3DV6 head apart, cle...
by Nareikuk
Sun Apr 05, 2015 3:46 am
Forum: Troubleshooting
Topic: Not getting 100% infill from MatterControl
Replies: 3
Views: 2924

Re: Not getting 100% infill from MatterControl

Have you tried setting the top and bottom layer count to a large number? Matter control prints infill, even when set to 100% and so will leave little holes. You can see this in the layer view in matter control.
by Nareikuk
Tue Mar 31, 2015 2:38 pm
Forum: Computer Hardware
Topic: Help selecting new computer
Replies: 30
Views: 31059

Re: Help selecting new computer

There is a fantastic company called Windows Technical Helpdesk. They call you automatically when they spot that your computer has issues and fix it for you through a helper application they can talk you through installing so they get remote access to your PC. Really good value for money, they can ev...
by Nareikuk
Tue Mar 17, 2015 8:27 am
Forum: General Tips 'N Tricks
Topic: PEI print bed surface experiments
Replies: 974
Views: 953429

Re: PEI print bed surface experiments

I had quite a lot of trouble trying to get ABS to stick to PEI. That was eventually solved with some help from mhackney to get the first layer right and also by increasing the bed temperature to 105C. Now that is way hotter than mhackney recommends, but it turns out that it is only 88C when measured...
by Nareikuk
Thu Mar 05, 2015 8:41 am
Forum: Troubleshooting
Topic: First Layer Frustrations - Resolved
Replies: 25
Views: 18090

Re: First Layer Frustrations

One of the best tips I got when I went through a period of not getting ABS to stick well without the Elmers magic was that with a 0.4mm nozzle on the E3Dv6, a layer height of 0.2 is about right. A first layer of more than 0.2 is too much. The zero height is set to the thickness of 80gm copier paper.
by Nareikuk
Wed Mar 04, 2015 3:41 pm
Forum: Rostock MAX v2
Topic: Ezstruder stepper motors are over heating
Replies: 10
Views: 7296

Re: Ezstruder stepper motors are over heating

Reduce the motor current setting for the extruder in configuration.h to around 130.
by Nareikuk
Fri Feb 27, 2015 9:37 am
Forum: What are YOU making?
Topic: 10" tall vase
Replies: 10
Views: 6384

Re: 10" tall vase

I am in the UK - $135 for the arms and trucks. Approx $40 for postage to UK. Approx $100 for the open builds stuff parts from the UK inc. postage.

Oh, and I must not forget the free clamps you designed and published on Repables :-) That was the cheap bit.
by Nareikuk
Fri Feb 27, 2015 8:56 am
Forum: What are YOU making?
Topic: 10" tall vase
Replies: 10
Views: 6384

Re: 10" tall vase

Hope it works out for you. Cost approx $280 for arms and carriages to see if it will work for me - plan on installing them tomorrow.
by Nareikuk
Fri Feb 27, 2015 8:53 am
Forum: FAIL HAPPENS ! ! !
Topic: small hairy things
Replies: 9
Views: 6619

Re: small hairy things

I'm not convinced it's an issue with Matter Control. Could well be the repetier firmware. I've had this reset a few (3-4) times but I'm not sure I was running Matter Control at all for one of them when I had a power cut mid print - once power restored, eeprom settings were reset. I think I was print...
by Nareikuk
Fri Feb 13, 2015 2:32 am
Forum: New Member introduction
Topic: New Forum member
Replies: 23
Views: 11424

Re: New Forum member

1.6.0 (on Windows at least) compiled repetier 0.91 without any issues after the prog_char type was changed to char, so you should be fine with the latest arduino IDE if you can make that small code change. It is only in 5 or 6 places in ui.cpp - 30 seconds to fix. Or you can grab the latest repetier...
by Nareikuk
Thu Feb 12, 2015 4:00 pm
Forum: New Member introduction
Topic: New Forum member
Replies: 23
Views: 11424

Re: New Forum member

Seems to work fine. I used the 0.91 master codeline that I downloaded a couple of weeks ago, but 1.6.0 of the arduino IDE built it and it seems to run fine. No obvious LCD issues so far (not extensively tested though).
by Nareikuk
Wed Feb 11, 2015 9:58 am
Forum: FAIL HAPPENS ! ! !
Topic: PLA Keeps jamming around the extruder. [RostockV2]
Replies: 3
Views: 3484

Re: PLA Keeps jamming around the extruder. [RostockV2]

If you have a Kysan stepper on the extruder, what have you set the current to be in the configuration.h file? I have mine set to 130 at the moment. 110 also worked for me. The motor is quite cool at 110, slightly warmer at 130 but too hot at 160.
by Nareikuk
Tue Feb 10, 2015 2:29 am
Forum: Troubleshooting
Topic: Ran into snag during build (Rostock Max V2).
Replies: 5
Views: 3749

Re: Ran into snag during build (Rostock Max V2).

If this is the stock power supply, then it is a single rail for 12V. Just pick any 12V cable - won't matter which connecter it goes to. E.g. one of the SATA 12V wires would do fine.
by Nareikuk
Mon Feb 09, 2015 4:04 am
Forum: Rostock MAX v2
Topic: E3D V6 constantly skipping?
Replies: 13
Views: 9321

Re: E3D V6 constantly skipping?

Have you tried reducing the retract to something like 2mm rather than the default of 6.5mm? And reduce the retract speed to about 20-30mm/s?
by Nareikuk
Sun Feb 08, 2015 12:33 pm
Forum: General Tips 'N Tricks
Topic: PEI print bed surface experiments
Replies: 974
Views: 953429

Re: PEI print bed surface experiments

Just a quick update. While I had PLA sticking very well, ABS was still not cooperating. Yesterday I tried a 100mm x 40mm rectangle in ABS but I increased the print bed to 115C (had to wrap it in a blanket to get it that high). The ABS stuck very well and didn't even release when the print was comple...
by Nareikuk
Fri Jan 30, 2015 1:38 pm
Forum: What are YOU making?
Topic: Rebreather Heads Up Display mount
Replies: 7
Views: 4307

Re: Rebreather Heads Up Display mount

Nice design. I loved my inspiration until I realised it was probably going to kill me one day and took up flying instead :-)
by Nareikuk
Wed Jan 28, 2015 3:57 pm
Forum: New Member introduction
Topic: Rostock v2 just shipped
Replies: 5
Views: 3542

Re: Rostock v2 just shipped

Make sure that you don't nip any wires when putting on the Perspex sides around the base. DAMHIKT
by Nareikuk
Wed Jan 28, 2015 1:57 pm
Forum: Troubleshooting
Topic: EEPROM Reset (Again!)
Replies: 9
Views: 5614

Re: EEPROM Reset (Again!)

Had another EEPROM reset this evening - but that was caused by a power cut. It looks like the repetier firmware is a bit sensitve to things like power cuts and resets the eeprom for no good reason. Oh, this was during a print.
by Nareikuk
Wed Jan 28, 2015 3:08 am
Forum: General Tips 'N Tricks
Topic: PEI print bed surface experiments
Replies: 974
Views: 953429

Re: PEI print bed surface experiments

Teoman, I'll try that. I had gone up to about 90C, but will try higher temperatures. I used 60C for PLA and 85 for ABS, but happy to try higher. I doubt my bed will reach 115C, but I know it goes to 105C (eventually).
by Nareikuk
Tue Jan 27, 2015 5:02 pm
Forum: General Tips 'N Tricks
Topic: PEI print bed surface experiments
Replies: 974
Views: 953429

Re: PEI print bed surface experiments

Ok, printed the first dozen or two layers after changing first layer height to 0.2. Can't get the print off the print bed! How the hell did that happen? This was printing PLA because that happend to be what I last printed with when I got a lifted corner. All I did differently was to reduce the first...
by Nareikuk
Tue Jan 27, 2015 4:17 pm
Forum: General Tips 'N Tricks
Topic: PEI print bed surface experiments
Replies: 974
Views: 953429

Re: PEI print bed surface experiments

Will give that a go. Just to be clear, the first layer height is set to 0.25 with a normal layer height of 0.2. Will set the first layer to 0.2 and leave the other layers at 0.2 as well. I have the first layer width set to 0.3.
by Nareikuk
Tue Jan 27, 2015 4:10 pm
Forum: General Tips 'N Tricks
Topic: PEI print bed surface experiments
Replies: 974
Views: 953429

Re: PEI print bed surface experiments

I know this can be made to work, just don't know how. My nozzle diameter is 0.4mm.

Go to advanced search