Welcome to the SeeMeCNC Community

20mm x 20mm x 10mm tall

I successfully printed the dino head! I changed the motor current values to the suggested versions in the source code. The stepper does run a little cooler now. I think that this was the actual issue. I reduced my retract speed from 20mm/sec to 15mm/sec. My retraction length is 2mm (I doubt this was...

My stepper is a kysan 1124090 7951. The extruder stepper is fairly hot, but the hobbed bolt isn't very warm. My motor current settings are: MOTOR_CURRENT {155,155,155,165,0} I am considering changing them to: MOTOR_CURRENT {140,140,140,130,0} The user guide suggests the 155 settings, and the comment...

I'm attempting to print the makerbot pocket t-rex skull ( http://www.thingiverse.com/thing:373367" onclick="window.open(this.href);return false; ) and am having issues. I can print larger items without any issues. These particular prints keep failing in the same spot. I've tried printing o...

I did this today. I thought that the thermistor was a ATC Semitec 104-GT2. I HOPE I AM WRONG -- SEE BELOW. The file to edit is configuration.h You need to find the line that starts with "#define EXT0_TEMPSENSOR_TYPE" and set the value to 8. (Or the actual type of the thermistor from the ta...

Did you wrap your hot end with tape? If not, wrap it. The old instructions don't mention this. The new ones do.

I had this same issue. The version of the manual I built from didn't mention the tape. Wrapping the hot end with tape fixed things.

Thanks.

The manual i'm working from is:

Welcome to the Assembly Guide for the Rostock MAX v2.0 3D printer.
Version 1.67, August 27th, 2014
Repetier-Host Edition
Copyright 2014 by Gene Buckle

Is there a newer version?

Some corrections for the next manual: Typo on Page 34: nut to fit, try inserting it from the other side of the part. The laser kerf results in a slight cut angle that makes one side of a cut area a tiny bit wider than the other. This will help get the nuts inserted. If they're too lose , you can use...