Welcome to the SeeMeCNC Community

Thanks to both for the reply.

Why are the PM's I'm trying to send stuck in the outbox? I don't understand what I'm doing wrong?

Ikarius wrote:I used the expert mode to solve this.

I appreciate your offer to help, but know that I'm actually using expert mode and it is still not working for me.

This guy has a price for a professionally built rostock max. Have your Rostock Max v2 3D Printer Professionall…: http://youtu.be/kiq3j4jjZPo" onclick="window.open(this.href);return false; Is yours professionally built with eeproms? :mrgreen: :shock: :o :o :evil: Good grief I actually list...

Has anyone had success with the 1.0.4 html version? I keep trying and always get similar values which are wildly off. And now I'm put off by version 1.0.1 that was working because I can't have scaling issues. I don't know what else to try since the Steps per mm fields was the only thing left I had t...

http://seemecnc.com/collections/3d-printers/products/rostock-max-v2-desktop-3d-printer-factory-assembled" onclick="window.open(this.href);return false; Now that SeemMeCNC is selling the fully assembled RMAX V2 for $1599, can we please use that as the baseline price for selling a used RMAX ...

Thanks for the info. The first version of the html does not require changing endstop values and works as can be seen on the video. The latest version (1.0.4) does require changing the end stops and I did change them but it didn't work for me.

Ok so now I've tried enough to feel confident in saying html version 1.04 is simply not working for me unless I'm supposed to know the motor step angle, driver micro stepping, belt pitch, and pulley tooth count. All which I have no frickin' idea. Can you please tell me what I'm supposed to use with ...

I have a PEI sheet installed in my RMAX V2 at home and it works lovely. However I installed another sheet in the printer at my workplace, (same vendor), and the prints will just not stick. I mean they stick, but eventually become loose and fail. Gluestick on glass works good on this printer so I kno...

Since this hasn't worked for you, and I don't have much information to really see what's wrong - the log in the auto calibration makes the process much easier - then I don't know exactly what to suggest at the moment. No prob. I’ll just print a modified version of the caliper holder to fit my calip...

I tried the html version over the weekend and got nowhere. First issue was the Repable Electronic Caliper holder was super loose on my caliper. I had to shim and stuff it with a paper towel. Took me a good while to feel confident that there was no play and I was getting accurate readings. The upload...

Got it. Thank you very much. If I am able to do this over the weekend I will report my results.

I may give the html version a try over the weekend but the github page is down. Is it also available on your google drive? GitHub is currently working for me, but here is the link for V2.1.1 https://drive.google.com/file/d/0B06WCAdBzwOdRkxRMjktLV9LT3c/view?usp=sharing" onclick="window.ope...

I may give the html version a try over the weekend but the github page is down. Is it also available on your google drive?

Our favorite quip was, "So, how's it feel to have your ass handed to you by an 11 year old girl?" :Dg. To be able to say that to an adult male, and have it be literal. Love it. Can't think of many other situations where this could apply. Reminds my of the best internet comment I've seen i...

So are you all in agreement with the OP’s assessment that fans negatively impacts layer adhesion? It does make sense. I ask because I’ve been considering purchasing two additional radial fans (the stock ones) to have three fans, one on each triangle corner of the effector. Is this a bad idea?

But how do you fix unsquare towers!? The frame is melamine and easy to break, all towers are coupled at the top so that pulling on one pulls on all the others. I even emailed the SeeMe folks and one of them confirmed all they do is slide the towers down the melamine and that’s it. No digital angle ...

There has not been a preview posted here on the forum yet, the status is still considered to be in development. As PartDaddy said though, a lot of time has been spent speaking with customers, sifting through the forums, discussions within our team etc in the development of the design. With that sai...

I'm just seeing this now and... wait...circuit board mount!? :shock: On the effector? I can't believe nobody's asked about that? So much news! So will these arms improve the ability of the printer to print near the edges of the print bed? That's kind of what I got from the OP, and that is my biggest...

Finally! I see a picture of someone using the entire bed! I had only seen one picture before this one and it was a seashell-shaped speaker housing. I like this one better since it is a square and it nearly touches the limits on all corners. This is exactly what I’ve been wanting to see. So apparentl...

Just got an absolutely incredible deal on this machine at $525. Is the deal still available? If you don't mind sharing where you purchased, I'm interested in buying a Pro as well. I always assumed he purchased it from someone slightly used. Someone maybe who thought 3D printing was just pressing a ...

Seriously considering offloading my Rostock Max V2 to buy one of these babies. I just was never able to use the whole print bed. Still drives me nuts. That has a 8.9 X 5.8 X 5.9 in build volume. Are you not able to match or exceed that with the Rostock? I very much doubt I can match it. And if I we...

Seriously considering offloading my Rostock Max V2 to buy one of these babies. I just was never able to use the whole print bed. Still drives me nuts.

Still, no replies. Looks like I'll have to take one for the team and assume the guinea pig role on this one.

mhackney wrote: I polish my tips and even with that, there is sticking.

Michael, thanks you for all the information you graciously share on these forums. I've seen this mention of polishing the nozzle on your guide as well. How do you do it? What tools/substances do you use to polish the outside of your nozzle?