Welcome to the SeeMeCNC Community

What Bed temp are people using with ABS?

I tried 80 and that resulted in warping. I see the docs state Max V2 can go up to 120.

peter

with the 200% setting, the infill turns out strong.

the nice part of the simpler infill is faster print speed compared to matter control's default triangle setting. I attached a picture of the calibration cube.

thanks for the tip. I'll give that a try and see how the result is

one nice feature of S3D is the cost calculation for a print.

I did print a calibration cube with S3D and the infill wasn't as strong as what matter control produces. If I figure out the right settings for that I'll post them.

I recently bought S3D and wrote a quick blog entry on setting it up for Rostock Max V2. http://electronsfree.blogspot.com/2015/04/setting-up-simplify3d-with-seemecnc.html" onclick="window.open(this.href);return false; Even though I had the printer calibrated with matter control, I found th...

Here's a picture of a simple guard I made to prevent the cables from catching. tomorrow I'll upload the stl file.

ahh ok, that makes sense. I just modeled a guard and printed it. will post the files later tonight. gotta love 3D printing!!! Need a part, just model and print.

jesse wrote:[img]http://i.imgur.com/HoPIx4c.jpg[/img]

[img]http://i.imgur.com/MRzklnm.jpg[/img]

Hi jesse,

I see from the picture the cheapskate uses a different design. Is that custom or from a different delta design?

thanks

peter

Has anyone designed a guard for Rostock Max V2 cheapskate? This week I was trying to print a large model that's about 10" wide and the print ran into issues when the wire bundle got stuck. I attacked 3 pictures showing what it looks like when the wire bundle gets caught. I was going to design o...