Search found 95 matches
- Sun Feb 19, 2017 9:58 pm
- Forum: Troubleshooting
- Topic: GCODE entry
- Replies: 9
- Views: 6481
Re: GCODE entry
Sorry about that, I'm preparing an update with example code that sets the M83 so you are doing relative extrusion moves. Are you going to mention that those tasks can be most easily achieved by manually inputting the GCODE into the host? I think it would be good to mention since that's the simplest...
- Sun Feb 19, 2017 9:36 pm
- Forum: Troubleshooting
- Topic: GCODE entry
- Replies: 9
- Views: 6481
Re: GCODE entry
So I can just send M83 first, and then do my tests? I take it that I should probably set it back to absolute before I go back to printing?
- Sun Feb 19, 2017 6:37 pm
- Forum: Troubleshooting
- Topic: GCODE entry
- Replies: 9
- Views: 6481
Re: GCODE entry
Oh. Really? Ok, I misread. So how is that set in the machine?
- Sun Feb 19, 2017 6:22 pm
- Forum: Troubleshooting
- Topic: GCODE entry
- Replies: 9
- Views: 6481
Re: GCODE entry
Ah ha! Yes, I was doing G1 E5 F60, and from what I've read, the G1 command is absolute movement. Ok. I'll have to look further into this! Thanks a lot!
- Sun Feb 19, 2017 3:03 am
- Forum: Troubleshooting
- Topic: GCODE entry
- Replies: 9
- Views: 6481
GCODE entry
So, I'm doing a feedrate/flowrate test from @mhackney 's guide for successful prints and I'm profiling a new filament. I know the GCODE to enter to manually extrude at certain feedrate, etc. However, the machine will never take two commands back to back. I'll enter it once, let it do it's thing, cha...
- Wed Feb 08, 2017 3:56 pm
- Forum: Troubleshooting
- Topic: [Solved] Print Warping
- Replies: 12
- Views: 7743
Re: [Solved] Print Warping
Ok, that's good info. I'll see what I can put together. I'm going to upgrade to the HE280 soon, but I have to finish this project I'm working on before I can take the machine down to do the upgrades.
- Tue Feb 07, 2017 10:14 pm
- Forum: Troubleshooting
- Topic: [Solved] Print Warping
- Replies: 12
- Views: 7743
Re: Print Warping
Is your part fan on? It needs to be off (or at a minimal speed) for ABS. Also check that your hotend fan isn't blowing air downwards. I had that issue on my printer, and ended up making a shroud for the hotend fan so that the intake end wasn't flinging air downwards and spoiling one end of the ABS ...
- Mon Feb 06, 2017 11:41 pm
- Forum: General Announcments
- Topic: Sad day guys - Eaglezsoar has left us
- Replies: 34
- Views: 71290
Re: Sad day guys - Eaglezsoar has left us
I'm terrible at keeping up with forums and people on them, but this guy really made me feel like a valued member. I had the occasion to message back and forth with him a few times, and he was helpful on some of the posts I was following. I wish I had gotten to know him like some of the people here, ...
- Wed Jan 04, 2017 8:52 pm
- Forum: Rostock MAX v2
- Topic: Rostock Max v2 HE280/Accelerometer Upgrade - Summary
- Replies: 28
- Views: 20664
Re: Rostock Max v2 HE280/Accelerometer Upgrade - Summary
My apologies, I didn't mean to suggest erroneous information. I had no idea people had already talked about using ferrite cores, I just know I used to use them a lot in comms work.
- Tue Jan 03, 2017 10:41 am
- Forum: Rostock MAX v2
- Topic: Rostock Max v2 HE280/Accelerometer Upgrade - Summary
- Replies: 28
- Views: 20664
Re: Rostock Max v2 HE280/Accelerometer Upgrade - Summary
Maybe running the I2C and interrupt lines through a ferro core would help eliminate the noise? Just a thought. They're fairly cheap and can usually be snapped around the cable. It would be an easier thing to try first before having to switch out cables. Awesome post though! I'm thinking about upgrad...
- Fri Oct 14, 2016 11:46 am
- Forum: Troubleshooting
- Topic: New Rostock Troubles
- Replies: 61
- Views: 34162
Re: New Rostock Troubles
KISSlicer is one that was already on my list too... So I'm going to start with that one. Thanks for the recommendation! I'll have to post up here once I have some results.
- Fri Oct 14, 2016 11:29 am
- Forum: Troubleshooting
- Topic: New Rostock Troubles
- Replies: 61
- Views: 34162
Re: New Rostock Troubles
Good to know. I don't really have the money to drop on it right now anyway, but I was curious. mhackney, any ideas for the best slicer to start with? I only ask because likely my material profiles will have to be redone, since they were performed while I had a major temperature error that I was unaw...
- Fri Oct 14, 2016 11:12 am
- Forum: Mods and Upgrades
- Topic: I will have a long weekend...
- Replies: 2
- Views: 3727
Re: I will have a long weekend...
Sounds like a fun long weekend! I'd put on some good music and have at!
- Fri Oct 14, 2016 10:50 am
- Forum: Troubleshooting
- Topic: New Rostock Troubles
- Replies: 61
- Views: 34162
Re: New Rostock Troubles
Also, I've seen a lot of people talk mad props about Simplify3D slicer, is it really worth the money?
- Fri Oct 14, 2016 10:45 am
- Forum: Troubleshooting
- Topic: New Rostock Troubles
- Replies: 61
- Views: 34162
Re: New Rostock Troubles
Thanks for all your help! I'm going to try going back to repetier-host and a standalone slicer. Which one did you use to create the GCODE you sent me?
- Wed Oct 12, 2016 10:17 am
- Forum: Troubleshooting
- Topic: New Rostock Troubles
- Replies: 61
- Views: 34162
Re: New Rostock Troubles
Try printing the attached Gcode on your printer. I tend to run pretty conservative settings within the printer community, but CraftWare estimates your print to complete within 20 minutes. The attached Gcode are set to print the first layer at a height of .2mm, at a speed of 10 mm/s and then 30 mm/s...
- Mon Oct 10, 2016 6:09 pm
- Forum: Troubleshooting
- Topic: New Rostock Troubles
- Replies: 61
- Views: 34162
Re: New Rostock Troubles
Wait. I just realized. I don't know why I didn't think of having to offset before. This probably affected every other calibration as well... *Doh*
- Mon Oct 10, 2016 6:03 pm
- Forum: Troubleshooting
- Topic: New Rostock Troubles
- Replies: 61
- Views: 34162
Re: New Rostock Troubles
Oh! Cool! I always wanted to get into CNC milling. Unfortunately I have confines on space. One day...
Ok, so use known quantity gauge to calibrate z-height, then ADD gauge thickness to z-height in EEPROM. Got it. I will do this and have results later tonight.
Ok, so use known quantity gauge to calibrate z-height, then ADD gauge thickness to z-height in EEPROM. Got it. I will do this and have results later tonight.
- Mon Oct 10, 2016 5:53 pm
- Forum: Troubleshooting
- Topic: New Rostock Troubles
- Replies: 61
- Views: 34162
Re: New Rostock Troubles
I'm also used to using feelers because of working in precision manufacturing previously. And all I have around is cheap printer paper. :-/
- Mon Oct 10, 2016 5:53 pm
- Forum: Troubleshooting
- Topic: New Rostock Troubles
- Replies: 61
- Views: 34162
Re: New Rostock Troubles
I experimented with a caliper and the gauges and found that the measurement was correct when the gauge had enough resistance that it almost couldn't move. However, what I'm thinking is that I can just use a 0.1mm feeler, since I'm going to offset for it anyway. So I would add the thickness of the fe...
- Mon Oct 10, 2016 5:32 pm
- Forum: Troubleshooting
- Topic: New Rostock Troubles
- Replies: 61
- Views: 34162
Re: New Rostock Troubles
0.0015" or 0.038mm. Thinnest one I could get.
- Mon Oct 10, 2016 5:20 pm
- Forum: Troubleshooting
- Topic: New Rostock Troubles
- Replies: 61
- Views: 34162
Re: New Rostock Troubles
I've been setting the Z-height by using the controls on the machine, and the above mentioned feeler gauge. Would it be better to use that gauge and then offset the Z-height? The way I usually do it is following the Rostock manual, but using feeler gauges instead of paper.
- Thu Oct 06, 2016 5:20 pm
- Forum: Troubleshooting
- Topic: New Rostock Troubles
- Replies: 61
- Views: 34162
Re: New Rostock Troubles
This is very good information. It looks like your infill in a good bit closer to the perimeters, are you doing more overlap? I don't mind running conservative settings. I prefer quality to speed. I've been printing at 20 m/s per mhackney's recommendations in his guide, but I wouldn't have thought of...
- Wed Oct 05, 2016 11:17 pm
- Forum: Troubleshooting
- Topic: New Rostock Troubles
- Replies: 61
- Views: 34162
Re: New Rostock Troubles
Ok, I've attached the gcode for the object (which is what I guessed you meant) and the .stl
- Wed Oct 05, 2016 10:06 pm
- Forum: Troubleshooting
- Topic: New Rostock Troubles
- Replies: 61
- Views: 34162
Re: New Rostock Troubles
Yeah, at one point I was using Slic3r and RepetierHost but I wanted to go back to basics while fixing my mechanical problems. I guess I should have just stuck with Slic3r. I've heard good things about KISS though.