Welcome to the SeeMeCNC Community

So I was able to get my towers pretty straight in relation to the bed, recalibrated, printed, and was still having issues. I found I wasn't compensating for the feeler gauge I was using while setting the z-height. (For other newbies, I used a 0.1mm feeler gauge to set the z-height, basically how ...

I'm new to this myself, but I would double check that the extruder is plugged into the correct port on the Rambo. Also, if you have a multimeter, put it on continuity mode and make sure the wires are not broken or shorting. The first thing I'd check, though, is to make sure the Rostock is connected ...

I think I tried a range of temps, as I've found people saying 80c-95c. Not sure I made it quite up to 100c. I'll definitely try it out once I get these towers straight.

So, after scouring the web, I found the answer to the second issue, which is, as most things in life, use some Wd40 and a razor, then acetone to clean up the rest. I still have a bit more to clean, but I've gotten most of it off. The first issue I'll have to look at some more. I've seen some posts ...

Hello everyone, Some background: I got a Rostock Max V2 a couple of weeks ago, got it together thanks to the Gene's build guide and the search feature of this site. I was able to print out a few small objects, including some calibration pyramids that came out pretty well, but I started getting the ...