Welcome to the SeeMeCNC Community

NIce construction! Don't you think the max printspeed will suffer much from the extra weight?

mhackney wrote:And now she has her birthday 7" PanelDue installed:

That's a nice birthday gift! Congratulations!

in the video i linked and the video fletcher linked, you can see that no special software is required. If dragging is not an issue that right. real Vinyl cutters do have an offset parameter though, and the drag, even with the small special vinylcutterknife is really someting that you can see at edg...

(It could be that FTDI's latest drivers for those chips have decided to give it garbage data) I just don't think that that is the case. The serial chip would give "garbage data" through RH also. And I don't think it is garbage data, because it is very consistent. But thanks for replying a...

Wel I have not been around in the 3d print scene to have seen any different version to the one I am (was) using.
Although I like the simplicity very much, I too for sure am not very enthusiastic anymore after the events that happened...

@Reikal: sorry for hijacking your question but...
@ enggmaug: So you have working FSR's on the standard Rambo board with just an upgrade repetier firmware? Can you confirm that OpenDact works on this combo? If so, I will order these FSR's at once!

I had some real sticky(ness) problems when I started printing too. Nothing seemed to stick to the glass. Now for PLA I have real good adhesion with UHU or Elmer's Purple etc... smeared on some thin self-adhesive transfer tape that is used for vinyl signing purposes too. It looks just like ordinary c...

Hmm, I guess my problem is either unseen before, or not very interesting ;-) I have conducted further calibrations within Reptier Host, and have been printing some test with good results. Still I would like to learn if there is some way of "resetting" Mattercontrol to get rid if it's stran...

Can you tell me where you found the documentation of how to connect these FSR's? If it works like this, I am very interested. In what I thought I learned from this forum is that FSR endstops are not very known to work great on the Rambo, and you probably need a Repetier firmware that is higher in ve...

Yeah, it got me drooling too... Besides the beauty of simplicity, would there be a reason for not having upper segments connecting the towers? I once heard there is some kind of trick to inverse the arms, to get the head above the skates instead of below. That would mean you can print objects that a...

Very nice video. I am so glad that I finally understand what a reel really is... It was not in my English vocabulary yet ;-) I like the way of Michael almost not being able to keep his eyes off the moving machine :mrgreen: And also the name Eclecting Angler, that's really hilarious :lol: A man of ma...

So, it seems that no-one here is familiar with the problems I have encountered... Lucky for all of you, but not for me! ;-) I took it one step further, and actually paid attention to the terminal output while operating MatterControl. And I see very strange thing... I really want to share here! Take ...

Thanks Windshadow, but I guess the backwards functioning knob is the least of my problems. I just mentioned it in case it would be related to any of the other problems I encounter. Following your comment I can rule that out. The skates going up most of the time after homing instead of down gives me ...

Desperately looking for a solution I decided te reflash the original firmware and start completely anew with the calibration. So that bear is off the road (freely translated from a dutch saying). But now the some kind of related problem... When I power up and connect, pressing the reset button on th...

Hmm, seems like problems are stacking up instead of down... While trying to find a relative easy way to make gcode scripts in MatterControl either Repetier, I switch between those a lot today. Somewhere at looking and changing firmware settings I Repetier Host managed to screw up a lot of values. I ...

I found a setting called Z-offset under settings - printer - print area (MatterControl), is that what you mean?
It's set to zero however...

DGBK wrote:You can make hot keys instead of a script. I have them set up for P0 through P9.

Can you please elaborate on this? I searched for hotkey setup for both repetier and mattercontrol but can't find anything...

Thanks KAS, I am aware of the Z height calibration. I just performed one, and after moving to a z of 2 the display still shows a Z of 2.96. Also if I look back the commands that come from the macro in the terminal, I see that the z value there already has been changed into 2.96. When I use the gcode...

I am trying to calibrate my V2 following this guide: http://forum.seemecnc.com/viewtopic.php?f=36&t=9605" onclick="window.open(this.href);return false;. While having made a few short scripts in MatterControl to send the hotend to specific positions and dial in manualy, I noticed that w...

I just stumbled upon this older thread, and am wondering if one of these designs would work in combination with an E3D hotend. It seems to have way less space below the effector, and most fan shroud designs are touching the print.

Thanks DGBK, exactly the info I was looking for! Now I know what to do this weekend! ;-) I don't see how this would be possible with a script and no dial indicator, as you'd need a dial indicator to avoid the fine tuning. If it would be possible to pause a script, you could take the time to do the d...

Nice to see people looking after each other!

Next question: (but don't forget my previous message! ;-) ) I am beginning to think that not only my Rostock has a loose screw, but my head too... Trying to perform the calibration as outlined at the escher website, I am putting some gcode into the terminal. Always when I send the hotend to height b...

I am trying this method for calibration, but wonder what the "Repetier firmware term" is for rule number 1 in the explanatory text. It says: "If you have tower radius corrections configured, remove them". But in the list of firmware settings I can't find that. Or are "Delta ...

Eaglezsoar wrote:Tricklaser sells this component meant for holding your digital probe. http://tricklaser.com/Pen-Tool-holder-f ... RM-PTH.htm" onclick="window.open(this.href);return false;

Their website seems to be down