Search found 12 matches
- Sat Aug 08, 2020 7:41 am
- Forum: Troubleshooting
- Topic: Filament feeding slows down/stop mid print then resumes
- Replies: 1
- Views: 1780
Filament feeding slows down/stop mid print then resumes
I am using an Artemis 300. So I think the gear that feeds the filament up through bowden tube is slipping about 1/3 way into the print, the print will finish so the filament must start getting fed in after a few minutes but the print is not really usable. I know some printers you can adjust the tens...
- Wed Mar 04, 2020 12:17 pm
- Forum: Troubleshooting
- Topic: Parts of first layer look bad
- Replies: 4
- Views: 3572
Re: Parts of first layer look bad
Its weird, if I use a raft the 1st few layers look awesome! See picture, then when it gets to the model the same thing starts happening, it eventually fixes itself by adding more layers which smooth's it out but this is weird. I wonder if I have some cura settings that are off ?
- Tue Mar 03, 2020 3:14 pm
- Forum: Troubleshooting
- Topic: Parts of first layer look bad
- Replies: 4
- Views: 3572
Re: Parts of first layer look bad
so should I run the first probe macro ?? or the _probe Autolevel ?
- Tue Mar 03, 2020 7:59 am
- Forum: Troubleshooting
- Topic: Parts of first layer look bad
- Replies: 4
- Views: 3572
Parts of first layer look bad
I have the Artemis 300. I am using atomic filament but lately, the first layer has parts that look like crap, see picture. The bed is clean, I have poked a thin acupuncture needle through the hotend to make sure it is clear. Anyone have any idea's ??
- Mon Jan 27, 2020 12:36 pm
- Forum: Cura
- Topic: Dual Extrusion issue with Y adapter Cura 3.4.1
- Replies: 2
- Views: 7711
Re: Dual Extrusion issue with Y adapter Cura 3.4.1
same problem here. I just edit the .gcode file and remove that line m104 so t1
- Thu Jan 23, 2020 11:17 am
- Forum: What are YOU making?
- Topic: Boiler Room
- Replies: 3
- Views: 5044
Re: Boiler Room
thanks! It's right out of REVIT, probably my most complicated print. Dual extrusion was a success too!
I work for an engineering company so hopefully I keep getting these kind of prints
I work for an engineering company so hopefully I keep getting these kind of prints
- Tue Jan 21, 2020 1:10 pm
- Forum: What are YOU making?
- Topic: Boiler Room
- Replies: 3
- Views: 5044
Boiler Room
My latest 3D print of a boiler room for a large apartment building. Making progress
- Tue Jan 21, 2020 11:13 am
- Forum: Troubleshooting
- Topic: Duel extruder problem
- Replies: 7
- Views: 4801
Re: Duel extruder problem
Turns out Cura does not know it is a 2 in 1 out extruder, so once it is done with one color/one extruder it tries to shut off the heat for that hot end. Since the Artemis doesn't have 2 hot ends it shuts off the only hot end.
Manually removing the m104 s0 t1 at the end of the gcode
Manually removing the m104 s0 t1 at the end of the gcode
- Tue Sep 24, 2019 9:42 am
- Forum: Troubleshooting
- Topic: Wiring issue
- Replies: 2
- Views: 2629
Wiring issue
I have an Artemis 300, the brown wire that goes into the hot end board seems to have snapped (see image) what are my options for fixing this.
- Mon Aug 26, 2019 1:54 pm
- Forum: Troubleshooting
- Topic: Duel extruder problem
- Replies: 7
- Views: 4801
Re: Duel extruder problem
Yes, both of the temperature settings match for extruder 1 and 2, 200 degrees basically for all the temps.
I wonder if I should up the temp ?
I wonder if I should up the temp ?
- Thu Aug 15, 2019 12:44 pm
- Forum: Troubleshooting
- Topic: Duel extruder problem
- Replies: 7
- Views: 4801
Re: Duel extruder problem
I got it off the github. It is the batarang thing, and that printed fine, this error is when I try and do my own model.
SeeMeCNC_Artemis_QuickStart_Dual_PLA_050Nozzle_Batarang_for_CURA_4-2-1
SeeMeCNC_Artemis_QuickStart_Dual_PLA_050Nozzle_Batarang_for_CURA_4-2-1
- Tue Aug 13, 2019 2:40 pm
- Forum: Troubleshooting
- Topic: Duel extruder problem
- Replies: 7
- Views: 4801
Duel extruder problem
I have an Artemis 300 and have been printing for a few weeks fine. I can use duel extrusion if I point the second extruder to print the raft. Now when I try to do it with a model I get the following error when it is time to switch to the second extruder. "Warning: Tool 1 was not driven because ...