I'm interested in seeing your upgrades.
Can you share a drawing / dimensions for your custom carriages?
Search found 10 matches
- Thu Nov 28, 2019 9:41 pm
- Forum: Rostock MAX
- Topic: I'm back and wanting to upgrade
- Replies: 21
- Views: 16168
- Mon Feb 06, 2017 5:41 am
- Forum: Rostock MAX
- Topic: Upgrade V1 to accelerometer (wiring guide)
- Replies: 0
- Views: 3168
Upgrade V1 to accelerometer (wiring guide)
I've got a Rostock Max V1, and always found calibrating annoying. I saw the new HE280 accelerometer board and bought one straight away. Then I had to figure out how to get it working. The below pictures show my wiring / setup. I have left my heater cartridge and termocouple separate, they are not wi...
- Tue Aug 20, 2013 2:55 am
- Forum: Rostock MAX
- Topic: Making the Rostock Max quieter
- Replies: 86
- Views: 51871
Re: Making the Rostock Max quieter
These dampers are great! Cut the sound of the machine by 2/3rds I reckon - gone from a bit loud / annoying to sit next to, to reasonably quiet and not interfering with music etc. Ordered on evening of 14th and arrived (from UK to Australia) on day of 20th. 4 working days! Install took me about 45 mi...
- Mon Aug 12, 2013 8:11 am
- Forum: Rostock MAX
- Topic: Making the Rostock Max quieter
- Replies: 86
- Views: 51871
Re: Making the Rostock Max quieter
Thanks for the thread.
Astrosyn have quoted me £2.65 per damper, plus £15 shipping to Australia for up to 20 dampers
If there are an aussies who want some dampers, contact me ASAP as I will be ordering some shortly and can order some extras and pass them on
Astrosyn have quoted me £2.65 per damper, plus £15 shipping to Australia for up to 20 dampers
If there are an aussies who want some dampers, contact me ASAP as I will be ordering some shortly and can order some extras and pass them on
- Thu Aug 08, 2013 7:40 am
- Forum: Rostock MAX
- Topic: My Rambo and Onyx issues and fixes
- Replies: 10
- Views: 7849
Re: My Rambo and Onyx issues and fixes
First print! I've rigged up a second power supply for the heated bed. Working fine with this. First couple of prints didn't stick to glass - added kapton tape and working well. Crappy photo of the print on the bed [img]http://images.imagineant.com/d/211542-1/20130808_203801.jpg[/img] View of bottom ...
- Wed Aug 07, 2013 6:43 am
- Forum: Rostock MAX
- Topic: My Rambo and Onyx issues and fixes
- Replies: 10
- Views: 7849
Re: My Rambo and Onyx issues and fixes
I've just tried putting a load on the 5v rail as some ATX power supplies need this to regulate 12v properly. Two hard drives (label says 0.8A 5V) connected - PSU still cuts out frequently with heated bed. I hooked up a separate old PSU to the heated bed power (to Rambo) and that seemed to work fine....
- Wed Aug 07, 2013 5:23 am
- Forum: Rostock MAX
- Topic: My Rambo and Onyx issues and fixes
- Replies: 10
- Views: 7849
Re: My Rambo and Onyx issues and fixes
I think it is something to do with load on PSU / different rails.
The PSU seems to stay on more often if I also have the hot end on when I turn on the onyx.
So:
Hot end doesn't cause any problems
Onyx alone trips PSU
Hot end for a few seconds then onyx stays on for a while then cuts out.
The PSU seems to stay on more often if I also have the hot end on when I turn on the onyx.
So:
Hot end doesn't cause any problems
Onyx alone trips PSU
Hot end for a few seconds then onyx stays on for a while then cuts out.
- Wed Aug 07, 2013 4:50 am
- Forum: Rostock MAX
- Topic: My Rambo and Onyx issues and fixes
- Replies: 10
- Views: 7849
Re: My Rambo and Onyx issues and fixes
I thought the numbers look large, but this is my first foray into 3D printing.
Those numbers are definitely what auto-tune gave me.
I've reset them to default values (15, 0.9, 40)
Turning on heated bed still trips PSU
Those numbers are definitely what auto-tune gave me.
I've reset them to default values (15, 0.9, 40)
Turning on heated bed still trips PSU
- Wed Aug 07, 2013 2:34 am
- Forum: Rostock MAX
- Topic: My Rambo and Onyx issues and fixes
- Replies: 10
- Views: 7849
Re: My Rambo and Onyx issues and fixes
Gah Onyx issue continues.
It ran a PID tune cycle fine.
Values:
Kp 836.4233333333333
Ki 278.4733333333333
Kd 629.36
I put them in the EEPROM in Repetier host and now it's doing the same thing where PSU cuts out as soon as onyx is turned on!
Help!
It ran a PID tune cycle fine.
Values:
Kp 836.4233333333333
Ki 278.4733333333333
Kd 629.36
I put them in the EEPROM in Repetier host and now it's doing the same thing where PSU cuts out as soon as onyx is turned on!
Help!
- Wed Aug 07, 2013 2:22 am
- Forum: Rostock MAX
- Topic: My Rambo and Onyx issues and fixes
- Replies: 10
- Views: 7849
My Rambo and Onyx issues and fixes
Hi guys, I've been assembling my Rostock Max for the past week or two. I originally bought the BYOLaser kit back in May. I had a K40 small Chinese laser - I didn't realise until after the kit shipped that my laser was much too small to cut the parts. The Rostock is a big printer. So I then decided t...