Welcome to the SeeMeCNC Community

Yeah those hillbilly cards... ;) I am just happy to have my printer back. I was told last night how spoiled I am... I AM NOT SPOILED! I am not! I am not! :oops: Can we please have a knowledge base & sticky FAQ with moderated posts (relevancy, no chatter) for these different topics, i.e. FAQ: SD ...

Yes! the better quality SD card finished the print! Yay! (indoor fireworks, confetti, crowd of one goes wild)
Thank you!
..Chrissi

Good tip, is there as size limitation to the cards?
...Chrissi

..okay found a Sandisk class (4), the one I was printing with was classless. Printer warming up now.

mhackney, Thanks for the brilliant config.h file. Nice prints too. My latest print is not a big one, yet it has frozen twice in a row about 3/4 the way through printing from the uSD card. I checked the G-code output before loading it onto the card to make sure it was complete. Print is probably too ...

Gene, problem solved!, please check out post under Repetier 091 release.
Thank you for the generous offer to help, I love this printer and felt out of sorts with out it =)
...Chrissi

SOLVED! ...a last :oops: Entirely my fault. I had done "a little housekeeping" because I did not like the error messages on load about directories with "-" characters etc, I did not like the nested empty subdirectories so I had moved "Repetier" folder up under "Lib...

This is funny, set up a Google Hangouts Ap and it would not work, turns out Hangouts is down.

OK, ...Google Hangout?
I hope I get it working using Randi's laptop before then but that will not solve these other two which are the primary ones.
So, looking forward to Wednesday, thanks!
...Chrissi

Hi, Running IDE 1.0.5 r2 under Win8.1 & XP Yes, it all worked wonderfully, printer worked great until I decided to recalibrate. I D/L'd the new firmware which at the time had the Y tower motor reversed. It crashed and I changed the Configuration.h to make that motor normal. Have not been able to...

Bubba, On the new laptop with Win 8.1 it stuffs it in the C:\programsx86\ folder. But I also tried it on my trusty Vaio running XP with same result. Both laptops also have software,routines, IDE & USB drivers for 4D Systems displays that also use the Arduino IDE. That is the only recent change/a...

I just wiped all traces of Repetier firmware out of this PC and D/L'd it fresh from the link on the SeeMeCNC site, unzipped it and otherwise touched nothing, opened up the file, hit compile and it choked, I get about 50 lines of Command.cpp errors. The laughable one is the first line: Commands.cpp:2...

Thanks! Thats good to know.

Loaded up a somewhat lengthy known working sketch of mine that included a OLED w/uSD, servos, MOSFET motor drivers etc and had no problem compiling and loading into my MEGA 2560 R3. So nothing wrong with Arduino IDE, or USB com. I am out of ideas, trying to locate older Repetier firmware to at least...

I put everything on my old laptop, hooked it up, checked the USB driver etc. On compile error is the same (expected that). Kind of stuck here because firmware on printer is not good and unable to compile therefor cannot upload good firmware. I'm sure one of you guys is a whole lot more experienced i...

I D/L'd the commented Configuration .h file and added that to my Repetier firmware folder. Thanks for all that, it is very helpful. On compile I got the following errors: Commands.cpp: In function 'void home_axis(bool, bool, bool)': Commands.cpp:142: error: 'struct PrinterState' has no member named ...

Opened file with Arduino IDE 104, same compile errors.

Well, it was a good intention, system won't restore.

running a system restore on old VAIO laptop. Only thing recently added or changed was to add USB drivers for 4D Systems intelligent display module. Though it uses a display and uSD card and Arduino so I cannot figure out why that could be in conflict with regular Arduino activities. Grasping at stra...

I've loaded freshly downloaded Repetier firmware on to ARDUINO IDE on both my laptops now and neither will compile. Printer will not work without it. Same errors on both machines

Thanks Gene, When I started it up after loading the revised firmware the Y leg came straight down on G28. I checked it against the prior version that I had originally been running on and it was not inverted on Y. I have been using Arduino 105 r2 from the beginning on this printer. But I am rested an...

When I was working on enabling systems for quads, many of them were formerly very active people, some hyperactive or daredevils doing X-games type stuff, or on 3 wheelers, quad runners and other activity related stuff causing injuries in the higher cervical area leaving them at minimum without the u...

very tired, patience short. Tried to recalibrate and then got to point where you change settings in configuration.h and go to upload it. compile give an endless string of errors such as: SDCard.cpp.o:C:\Users\Randi\AppData\Local\Temp\build2145459656099637118.tmp/SDCard.cpp:83: first defined here Rep...

This is not auto calibration but may take the guesswork out of using a piece of paper: http://www.edgetechnologyproducts.com/pro-touch-off-gage/ I use this gauge for setting tool offsets for our CNC Bridgeport mill, it leaves no ambiguity or judgment calls, works better than other contact methods an...

Looking for the LIKE button =)

Very cool applications for this tech. My last employed position before went out on my own was designing systems for quadriplegics incorporating a 9 button wireless keypad in an upper dental retainer. Gave them a great deal of independence. They could control their world, operate a computer and commu...