Search found 141 matches

by critical_limit
Wed Aug 06, 2014 4:26 am
Forum: Repetier Host
Topic: Version 1.0.0
Replies: 6
Views: 6921

Re: Version 1.0.0

Hi, you have to change the gCode in Cura. Goto Config in Cura and you will find a tab named G-Codes. Look to the Start Code and change it. For example: ; Default start code G28 ; Home extruder G90 ; Absolute positioning M82 ; Extruder in absolute mode {IF_BED}M190 S{BED} ; Activate all used extruder...
by critical_limit
Tue Aug 05, 2014 1:10 pm
Forum: Rostock MAX v2
Topic: stepper motors are super hot!
Replies: 50
Views: 34135

Re: stepper motors are super hot!

guanu wrote:
to:

#define MOTOR_CURRENT {155,155,155,165,0} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A KYSAN MOTOR CURRENT SETTINGS )

and your problem should go away... you will have more torque and lower temps!

Hi Guanu,

more torque with lower amps??
Can you explain?

Thanx
Dirk
by critical_limit
Thu Jul 31, 2014 5:24 pm
Forum: Rostock MAX v2
Topic: Repetier 0.92 BETA To Rostock Max V2 ?
Replies: 4
Views: 4150

Repetier 0.92 BETA To Rostock Max V2 ?

Hi, anyone here who did the conversation of the Github work092 Firmware to the specialized Rostock Max V2 Settings? Seems that autocalibration now works for Deltas and want to test it. But not shure what I have to change to customize the new Firmware for the RM V2. Is it only the configuration.h ? D...
by critical_limit
Thu Jul 31, 2014 10:54 am
Forum: Troubleshooting
Topic: FIXED Extruder vibrating/grinding/ not working in general
Replies: 6
Views: 3966

Re: Extruder vibrating/grinding/ not working in general

just put the Extruder plug to one of the others (eg. X-axis) outlet on the board. Move via Repetier the z-high. What is your extrudermotor doing? Same behavior? Check your wiring. Moving normal? Compare pin settings in pins.h with your old repetier firmware. If are the same I suspect your board or o...
by critical_limit
Thu Jul 31, 2014 8:53 am
Forum: Rostock MAX
Topic: Auto Level - Auto Calibration Talk
Replies: 96
Views: 99108

Re: Auto Level - Auto Calibration Talk

I´ve read in Github Repo that they fixed the autolevel in 0.92 beta.

I´m not at Home for a few days, but I will check it next week.
by critical_limit
Thu Jul 31, 2014 8:48 am
Forum: Rostock MAX v2
Topic: where to purchase astrosyn dampers?
Replies: 5
Views: 4306

Re: where to purchase astrosyn dampers?

Or at astrosyn:

http://astrosyn.com/product.php/74/my17rmdamp" onclick="window.open(this.href);return false;

I ordered them online and they are arrived in germany 2 days later.

cheers
dirk
by critical_limit
Sun Jul 27, 2014 5:21 pm
Forum: Rostock MAX v2
Topic: use 0.9° stepper motors??
Replies: 3
Views: 3153

Re: use 0.9° stepper motors??

Ok, thanx for this information.

Will go one with the 1.8° ones. Maybe later I will give it a try...
by critical_limit
Sun Jul 27, 2014 4:35 pm
Forum: Rostock MAX v2
Topic: use 0.9° stepper motors??
Replies: 3
Views: 3153

use 0.9° stepper motors??

Hi, after I finished my built I want to "upgrade" my RMv2 a little. First what I ordered is a new Hotend E3D V6 with .3 Nozzle for fine prints. Now I´m wondering if it is a good idea to change the stock 1.8° steppers to 0.9° ones. But searching for the Motors I recognized they have all dif...
by critical_limit
Wed Jul 23, 2014 3:56 pm
Forum: DropLit
Topic: Codename: DropLit
Replies: 79
Views: 41223

Re: Codename: DropLit

Have one request and two questions:

1) Please post more pics of printed parts.

2) when? how much?

;-)

still waiting for my Rostock Max (stucking in customs, and that drives me crazy!), but I guess my next project (and money) goes to seemecnc as well ;-)
by critical_limit
Wed Jul 16, 2014 12:08 pm
Forum: Rostock MAX v2
Topic: Heatbed to 24V Question
Replies: 23
Views: 15387

Re: Heatbed to 24V Question

Sorry to jack your thread, but I too have been thinking about going with a 24 volt PSU. If I ran an SSR and just used the trigger from the Rambo to turn it on, would that actually send the full 24 volts to the Onyx? Hi Drew, yes it will. But as mentioned, your PSU needs to be able to delivered min ...
by critical_limit
Wed Jul 16, 2014 6:11 am
Forum: Rostock MAX v2
Topic: Heatbed to 24V Question
Replies: 23
Views: 15387

Re: Heatbed to 24V Question

Hi Hansen, you are absolutly right with your calculations. If you let it uncontrolled it will draw 24A at 24V. But my 24V-Source is constant current limiting. It will hold 24V and limiting to 10Amps max constantly. Should work I guess. But whats with the LED?? Is a bigger resistor needed? Don´t know...
by critical_limit
Tue Jul 15, 2014 3:32 pm
Forum: Rostock MAX v2
Topic: Heatbed to 24V Question
Replies: 23
Views: 15387

Re: Heatbed to 24V Question

Dirk, firstly congrats to Germany on a great World Cup win! Hi Michael. Thanx for the quick reply. Have you seen the final? Great game! And after whole Germany was on Party! I went to bed at 4 in the Morning after a lot of beers ;-) Ok, so I will setup my max V2 to 24V heatbed. But I don´t want to ...
by critical_limit
Tue Jul 15, 2014 2:32 pm
Forum: Rostock MAX v2
Topic: Heatbed to 24V Question
Replies: 23
Views: 15387

Heatbed to 24V Question

Hi All, my Max V2 is still on Order, not shipped yet and I hope it will not take years to have it shipped to Germany. I want to upgrade my Heatbed to 24V from the beginning. So I have a question: Is it just to put on the 24V to the Heatbedrail of the Rambo and run the PID-Setting Procedure? Or do I ...
by critical_limit
Fri Jul 11, 2014 9:33 am
Forum: Rostock MAX v2
Topic: Rostock Max V2 with .35 Nozzle?
Replies: 5
Views: 4470

Re: Rostock Max V2 with .35 Nozzle?

Thanx g. for the quick reply. Any other settings you´ve changed exept speed? Can´t wait to have my Rostock here, but I will give it a try from the beginning and will install the .35 Nozzle. On my other Printer (Makerbot) I´m using .3 Nozzle and the parts are very good. Hope its the same or even bett...
by critical_limit
Fri Jul 11, 2014 3:05 am
Forum: Rostock MAX v2
Topic: Waiting for V2 to arrive, What Mods to get before Build???
Replies: 26
Views: 15297

Re: Waiting for V2 to arrive, What Mods to get before Build?

Hi,

I´m waiting for my V2 as well and going throu this forum. Dampers sounds good to install. But where I can get these dampers and where to buy?
Anybody have a link to these recommended dampers?

Thanx
Dirk


**** Found the dampers and ordered ***
by critical_limit
Fri Jul 11, 2014 2:49 am
Forum: Rostock MAX v2
Topic: Rostock Max V2 with .35 Nozzle?
Replies: 5
Views: 4470

Rostock Max V2 with .35 Nozzle?

Hi All, two days ago I ordered a Max V2. This is my first Delta, but noch my first 3D printer. Anybody here printing with .35 Nozzle on the Rostock Max V2? Just preparing the build any try to get as much informations as I can get to be prpaired for the Build and the first prints. If anybody out ther...

Go to advanced search