Welcome to the SeeMeCNC Community

[img]http://imgur.com/xDYyvjj[/img]
[img]http://imgur.com/lJrEhvZ[/img]

Trying to figure out what is causing this. Is my print head too far from the bed? I have slic3r configured for 1.71 filament and I went through the calibration process successfully (i think). Any thoughts?

I've got it retracting 10mm at 50mm/s , seems to be working fine for PLA, might try lowering the distance down to get things moving a bit quicker.

Here's a quick video of the astrosyn dampers with soborthane feet: https://www.youtube.com/watch?v=p07lxaPDSnE#t=229" onclick="window.open(this.href);return false; I can't tell it's running when I walk out of the room, the fan on the back of the board is audible. I don't think you can hea...

Here's a quick video of the astrosyn dampers with soborthane feet: https://www.youtube.com/watch?v=p07lxaPDSnE#t=229" onclick="window.open(this.href);return false; I can't tell it's running when I walk out of the room, the fan on the back of the board is audible. I don't think you can hear...

Finally got the bed's thermistor working and the bed calibrated, decided to print the fan shroud in PLA because the ABS hasn't arrived yet. Even without a layer fan or cleaning the bed the print came out fine :) Still need to work on some overhang issues but the stringing is non-existent. Thanks to ...

Got a few test runs of the arms installed last night, no hot end or anything yet, with the Astrosyn Dampers dampers from http://www.tridprinting.com/Electronics/#Stepper-Motor-Dampers must say, this thing is quite quiet. They were $27 shipped. I haven't received the cork dampers yet, but after I get...

About 1/2 way through the build, about ready to wire up the hot end. Realized last night I was only shipped 5' of 18 gauge wire instead of 10', gotta make a run to the hardware store I suppose lol.

Small typo in the Burn Hazard section of Page 2:

Also before of the heated bed which can reach high temperatures capable of causing burns.

Well they must be pulling some extra hours, got a shipping notification email today Hopefully UPS will have it here tomorrow or the next day!

I purchased both the metal and cork dampers and will upload a video of the differences when my kit gets here in a few weeks since it doesn't seem to have been done very well yet.

What about some carbon fiber arms to improve print quality?

Yes I understand working on holidays I get today off as well lol

Interested, sent you a PM, any still in stock?

Mine's pretty loud, even with the Astrosyn dampers, but I have mine seated on a bare wooden stand, so I think Eagle's advice regarding the rubber mat is definitely worth taking. I've been meaning to do that myself. Also noticed that the sound resonates with the top plate on... the top section becom...

Sounds like a good place to start I'll email them and see if I can get a large order together, maybe sell the rest here and on ebay..

Thanks for the help guys! Can't wait til the printer arrives

Ya I didn't want to bother then with too many beginner questions right off the bat. Yes I have downloaded the manual and read through it once so far, I found with my Prusa it definitely helped once the kit arrived with assembly. I'll be trying to get my printer as quiet as possible, maybe upload som...

Just purchased my v2 max yesterday! Sold my Makerfarm Prusa i3 8" on craigslist and put the money into my first delta!

Is the 7 - 10 day lead time accurate? Trying to schedule out my build time over the next few weeks!

Thanks for the tip, these look promising: http://astrosyn.com/product.php/74/my17rmdamp" onclick="window.open(this.href);return false; Before and after: https://www.youtube.com/watch?v=_3Xn7b7tcxY" onclick="window.open(this.href);return false; Does pulling the motor 5cm away from...

Is something like https://www.youtube.com/watch?v=7V-yaSiZ4k8 a good example of how loud one is stock? My makerfarm is audible through multiple walls, this sounds like even a cloth draped over it would silence it? I could definitely live with that amount of noise.

Hello! I currently have a Makerfarm Prusa i3 8" that is making too much noise. I've talked with Colin from Makerfarm and he stated the amount of noise and vibration was normal for his kit. The tenant below he has complained that my machine is making too much noise, so I'm looking for something ...

You can also just buy a sheet of cork from your hobby store and cut it out yourself! I used it on my makerfarm prusa i3 to quiet the y axis motor.