I saw a enclosure for the 7" screen that fit in the Rostock Max V2 original LCD bay. It was also tilted. Anyone remember that one? I'm looking to print it.
Thanks
Enclosure for 7" Panel Due
- Jimustanguitar
- ULTIMATE 3D JEDI
- Posts: 2631
- Joined: Sun Mar 31, 2013 1:35 am
- Location: Notre Dame area
- Contact:
Re: Enclosure for 7" Panel Due
DC42 has one. He is the Duet and Due guy, after all.
http://www.thingiverse.com/thing:656884
http://www.thingiverse.com/thing:656884
Re: Enclosure for 7" Panel Due
It suits what I have in mind as well...
Looks like it must have the pcb mounted with a extension cable or maybe it is off-center... there must be a cover that goes on the front of it?
Looks like it must have the pcb mounted with a extension cable or maybe it is off-center... there must be a cover that goes on the front of it?
Bob
Rostock Max V2, Ball Cup Arms, New Carriages, HE280, Dampers, PSU Breathing, Simplify 3D, GeckoTek3D, Raspberry Pi3. Duet soon... Kossel Mini still under construction.
Delta's are the way!
Rostock Max V2, Ball Cup Arms, New Carriages, HE280, Dampers, PSU Breathing, Simplify 3D, GeckoTek3D, Raspberry Pi3. Duet soon... Kossel Mini still under construction.
Delta's are the way!
Re: Enclosure for 7" Panel Due
The mounts for the PanelDue driver and the Duet are in the "snorkel" plus there is a cover, I forgot to link itcrocky wrote:It suits what I have in mind as well...
Looks like it must have the pcb mounted with a extension cable or maybe it is off-center... there must be a cover that goes on the front of it?
http://forum.seemecnc.com/download/file.php?id=11747
Re: Enclosure for 7" Panel Due
you have version 2.4
here is a copy of version 2.6 your faceplate is version 1.5
here is version 1.8
here is a copy of version 2.6 your faceplate is version 1.5
here is version 1.8
Re: Enclosure for 7" Panel Due
SeeMeCNC Rostock Max V2
Makerbot Replicator Gen 5
Makerbot Replicator Gen 5
Re: Enclosure for 7" Panel Due
Here is how I attached the Due and Duet using the mount.
http://forum.seemecnc.com/viewtopic.php ... 100#p85491
http://forum.seemecnc.com/viewtopic.php ... 100#p85491
My 3D-Printing learning curve is asymptotic to a Delta's X, Y and Z-axes
Re: Enclosure for 7" Panel Due
Thank you..... and 3D Print?Outsider wrote:you have version 2.4
here is a copy of version 2.6
PanelDue and Duet Base for ROSTOCK Max V2 - Version 2.6.stl
your faceplate is version 1.5
here is version 1.8
PanelDue and Duet Faceplate V2 Version 1.8.stl
Bob
Rostock Max V2, Ball Cup Arms, New Carriages, HE280, Dampers, PSU Breathing, Simplify 3D, GeckoTek3D, Raspberry Pi3. Duet soon... Kossel Mini still under construction.
Delta's are the way!
Rostock Max V2, Ball Cup Arms, New Carriages, HE280, Dampers, PSU Breathing, Simplify 3D, GeckoTek3D, Raspberry Pi3. Duet soon... Kossel Mini still under construction.
Delta's are the way!