Rosetta Bone: BeagleBone Black RAMPS translator

Desktops, Laptops, Tablets and other computer related hardware
Post Reply
edward
Printmaster!
Posts: 207
Joined: Mon Jun 03, 2013 8:55 am
Location: Fort Wayne, IN
Contact:

Rosetta Bone: BeagleBone Black RAMPS translator

Post by edward »

Saw this on Hackaday: http://www.buildlog.net/blog/2013/09/cn ... eaglebone/

(here's the Hackaday link: http://hackaday.com/2013/09/19/beaglebo ... ore-103331)

This is a rather exciting and stupidly simple method for getting real a CNC interpreter (LinuxCNC) to run our machine without needing newly designed hardware. While the ARM stuff looks promising, the BeagleBone Black has a real-time processing unit. Real-time processing. REAL-TIME!!!

Anyway. I thought some of you guys might like to see this.
My Thingiverse profile: http://www.thingiverse.com/edwardh

User avatar
Flateric
Printmaster!
Posts: 825
Joined: Fri Feb 15, 2013 4:35 pm
Location: Calgary, Alberta

Re: Rosetta Bone: BeagleBone Black RAMPS translator

Post by Flateric »

Currently waiting for mine, have been for some time.....
"Now you see why evil will always triumph! Because good is dumb." - Spaceballs

geneb
ULTIMATE 3D JEDI
Posts: 5117
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Rosetta Bone: BeagleBone Black RAMPS translator

Post by geneb »

Edward, if the Beagle Bone Black is running Linux, it's NOT "real-time". (Unless the Linux it's running is RTLinux or other RTOS version of Linux)

...just sayin'. :D

[edit: just read about the PRU. I'll shut up now.]
g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

edward
Printmaster!
Posts: 207
Joined: Mon Jun 03, 2013 8:55 am
Location: Fort Wayne, IN
Contact:

Re: Rosetta Bone: BeagleBone Black RAMPS translator

Post by edward »

:) LinuxCNC is distributed as a full system that runs a real-time Linux variant. This is even for machines without a PRU.

Flateric wrote:Currently waiting for mine, have been for some time.....


Where did you get it? This is the first I've seen this board (obviously) but I've been researching the various CNC capes for a while now. For me this seems like a much better solution than the BeBePr+ with a binary blob tranlsating all of the I/O.
My Thingiverse profile: http://www.thingiverse.com/edwardh

Post Reply

Return to “Computer Hardware”