Arc Recognition, G2/G3 now activated
Posted: Wed Sep 16, 2020 8:32 am
Well, activated for just a few printer posts. Currently Prusa, RepRap, Bigrep, and the Autodesk Generic FFF post.
I modeled a test piece in Fusion, a 3" cylinder, 1" tall, with 3, 1" holes. The file size with normal slice settings was 17.5 Mb. After checking all of the appropriate boxes to activate arc recognition, the file size dropped to 6.5 Mb.
I haven't tried printing it yet, as I have to setup the printer configurations for my FT-5, running a Duet wifi.
Also on the list is to import a stl file, and see how it handles that.
I modeled a test piece in Fusion, a 3" cylinder, 1" tall, with 3, 1" holes. The file size with normal slice settings was 17.5 Mb. After checking all of the appropriate boxes to activate arc recognition, the file size dropped to 6.5 Mb.
I haven't tried printing it yet, as I have to setup the printer configurations for my FT-5, running a Duet wifi.
Also on the list is to import a stl file, and see how it handles that.