Help with Kisslicer when compared with Cura

Talk about KISSlicer software here (http://kisslicer.com)
Post Reply
johnknoy
Noob
Posts: 2
Joined: Tue Jan 10, 2017 11:42 am

Help with Kisslicer when compared with Cura

Post by johnknoy »

I'm using Kisslicer 1.6 beta 2.4 (previously was using Kisslicer 1.5 with the same issues), and have been trying to reduce some pretty serious stringing, as well as clean up some pretty rough prints. I tried opening the same retraction test object in Cura 2.4.0, and the model prints almost flawlessly.
I prefer to work with Kisslicer, and was hoping that someone could help me get the Kisslicer performance to match what Cura is able to do. I'm sure I've just not set something up properly.

The image below shows the results of Cura 2.4.0 on the left, and Kisslicer 1.6 beta 2.4 on the right.
[img]https://s26.postimg.org/uqh6g1hll/IMG_2 ... 085957.jpg[/img]

I've attached my kiss slicer settings, the cura profile (renamed to .ini so it will upload), and the STL file I've been working with.

I'd really appreciate any help that you can provide!

Thanks,
John
Attachments
Cura-he280-pla.curaprofile.ini
(1.08 KiB) Downloaded 219 times
Tuning Part.stl
(13.95 KiB) Downloaded 230 times
Support - sample support.ini
(721 Bytes) Downloaded 219 times
Style - Calibration Cura Copy.ini
(545 Bytes) Downloaded 220 times
Printer - Rostock MAX.ini
(2.64 KiB) Downloaded 222 times
Material - SeeMeCNC Black PLA - Cura Copy.ini
(1.01 KiB) Downloaded 232 times
Post Reply

Return to “KISSlicer”