Need help with setting going from KISS 1.5 to 1.6

Talk about KISSlicer software here (http://kisslicer.com)
Post Reply
nohc
Prints-a-lot
Posts: 23
Joined: Mon Nov 21, 2016 11:48 pm

Need help with setting going from KISS 1.5 to 1.6

Post by nohc »

Hello,

I just moved over to KISS 1.6 and I am so happy that it has eliminated my on going stringing problem with PLA. I just need help understanding how to make perimeter walls print with infill. Side by side example in the picture. Not sure how to control that. Printing with a RSM V3 E3d V6 with .5 nozzle.
Attachments
20180128_200733.jpg
Post Reply

Return to “KISSlicer”