KISS beta manual...

Talk about KISSlicer software here (http://kisslicer.com)
Post Reply
User avatar
mhackney
ULTIMATE 3D JEDI
Posts: 5412
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

KISS beta manual...

Post by mhackney »

An indépendant person has been working on a KISS manual that is quite useful: http://3ntr.eu/wp-content/uploads/2014/ ... 260814.pdf" onclick="window.open(this.href);return false;

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler
JFettig
Printmaster!
Posts: 824
Joined: Tue Nov 18, 2014 4:39 pm
Location: Minnesota

Re: KISS beta manual...

Post by JFettig »

I'm printing something from the latest beta, probably have some settings set wrong but I'm gonna have a heck of a time getting the bottom layer of support off of my part!

Also found that any sort of prime causes the program to crash - pillar, skirt, etc. Also with a skirt it causes the raft to inflate way too big and is goofy shape.

Definitely have some random moves.

The few times I've run KISS for a program its worked pretty well, just somewhat inefficient paths jumps around a lot but the parts turn out nice!
User avatar
Batteau62
Printmaster!
Posts: 399
Joined: Wed Apr 03, 2013 12:36 pm
Location: Connecticut

Re: KISS beta manual...

Post by Batteau62 »

KISS is still my "go to" slicer. Thanks for the link Michael :)
-"Simpler is better, except when complicated looks really cool."
-"As soon as you make something fool proof...along comes an idiot."
-"I have not failed. I've just found 10,000 ways that won't work." ~Thomas Edison
Post Reply

Return to “KISSlicer”