firmware install??

Post Reply
User avatar
hsb727
Plasticator
Posts: 12
Joined: Fri Aug 10, 2012 9:42 pm
Location: Pana, Illinois

firmware install??

Post by hsb727 »

1st
Is there firmware already installed on the ramps1.4 kit?
I assumed ( dangerous I know ) not and yet I get errors when
compiling the Repetier FW.. looking for a better source for firmware if
I must load one.
tnx
johnoly99
Printmaster!
Posts: 736
Joined: Mon Mar 26, 2012 1:07 pm
Location: Goshen, IN

Re: firmware install??

Post by johnoly99 »

hsb, John here. The guys at ultimachine pre-load sprinter on the RAMPS boards. If you are having trouble compiling repetier, what version of arduino are you using? I've found if I use 0023 i don't get any problems, but V1.0 does have some compiling issues with some of the firmwares out there.
Polygonhell
ULTIMATE 3D JEDI
Posts: 2430
Joined: Mon Mar 26, 2012 1:44 pm
Location: Redmond WA

Re: firmware install??

Post by Polygonhell »

Most firmware will not complile with 1.0 without additional libraries I believe these are sufficient

https://github.com/Traumflug/Generation ... %202.0.zip

Marlin/Sprinter and Repetier all compile with 0.23 without issue
Post Reply

Return to “RAMPS”