vibration dampers on clearance
-
- Printmaster!
- Posts: 458
- Joined: Sun Sep 07, 2014 2:39 am
vibration dampers on clearance
Anyone thinking about adding vibration dampers to your stepper motors, now is the time. Grab some form the SeeMeCNC parts shop while they are on sale. Doesn't say if these are Astrosyn or other brand, but at $3.50 each the price is hard to beat. You'll need to source a pair short M3 screws to install the damper to the motor. Re-use the original motor mounting screws to mount the damper to the upright.
http://seemecnc.com/collections/discoun ... on-dampers
http://seemecnc.com/collections/discoun ... on-dampers
"Trust no quote from the Internet." - Abraham Lincoln
Re: vibration dampers on clearance
+1 my ears would recommended
- astroboy907
- Printmaster!
- Posts: 150
- Joined: Mon Jul 08, 2013 4:09 pm
Re: vibration dampers on clearance
Their pics definitely look like astrosyns... Good deal!
My Heatware!.Flateric wrote: Black ABS, weak part, bizzare holes, bad layer adhesion, loss of details. Loss of sanity.
Re: vibration dampers on clearance
Grabbed 3.
Re: vibration dampers on clearance
These are the good ones guys.
"Now you see why evil will always triumph! Because good is dumb." - Spaceballs
- Eaglezsoar
- ULTIMATE 3D JEDI
- Posts: 7185
- Joined: Sun Apr 01, 2012 5:26 pm
Re: vibration dampers on clearance
That is a great deal for those who need them!
Don't forget that Astroboy sells these also.
Don't forget that Astroboy sells these also.
Re: vibration dampers on clearance
Have these on my machine...so quiet that I think my hotend fan is the loudest component.
Current Machines || Rostock Max (V1) | V3DR ||
Previous Machines || Flashforge Creator Pro ||
Previous Machines || Flashforge Creator Pro ||
Re: vibration dampers on clearance
Just ordered mine from TriPrinting and saw this for much cheaper. Kicking myself. I would return them, but I dont want to wait.
The BONE ZONE build thread.
- astroboy907
- Printmaster!
- Posts: 150
- Joined: Mon Jul 08, 2013 4:09 pm
Re: vibration dampers on clearance
Sorry, that was partially my fault. Didn't see them on SeeMe until the other day...BONE wrote:Just ordered mine from TriPrinting and saw this for much cheaper. Kicking myself. I would return them, but I dont want to wait.
My Heatware!.Flateric wrote: Black ABS, weak part, bizzare holes, bad layer adhesion, loss of details. Loss of sanity.
Re: vibration dampers on clearance
So I'll be getting my refund from you? JKastroboy907 wrote:Sorry, that was partially my fault. Didn't see them on SeeMe until the other day...BONE wrote:Just ordered mine from TriPrinting and saw this for much cheaper. Kicking myself. I would return them, but I dont want to wait.
The BONE ZONE build thread.
- Jimustanguitar
- ULTIMATE 3D JEDI
- Posts: 2631
- Joined: Sun Mar 31, 2013 1:35 am
- Location: Notre Dame area
- Contact:
Re: vibration dampers on clearance
Sometimes that's the cost of doing business, as a consumer that is
I paid $8 ea for mine, and that's fine. I assumed that Astroboy payed the shipping to import a bulk order of them, and he's definitely got to make a couple bucks to make it worth his while. I have zero issues with that.
I used to sell oil seals for an obscure Yamaha motorcycle to other forum members, same kind of situation where there was a ridiculous shipping cost so I ordered a few dozen... Gotta make a few bucks to even be worth the hassle.
I paid $8 ea for mine, and that's fine. I assumed that Astroboy payed the shipping to import a bulk order of them, and he's definitely got to make a couple bucks to make it worth his while. I have zero issues with that.
I used to sell oil seals for an obscure Yamaha motorcycle to other forum members, same kind of situation where there was a ridiculous shipping cost so I ordered a few dozen... Gotta make a few bucks to even be worth the hassle.
Re: vibration dampers on clearance
Hey I agree. I was just kidding around.
The BONE ZONE build thread.
- astroboy907
- Printmaster!
- Posts: 150
- Joined: Mon Jul 08, 2013 4:09 pm
Re: vibration dampers on clearance
Haha, no hard feelings here. I'd love to help people get the best deal on what they buy - I don't make too much of a cut, but it's something I enjoy doing, so I don't mind putting time into it. FWIW, either SeeMe got a killer deal, or they are selling them at a loss, because I definitely have not gotten a price like that...Jimustanguitar wrote:Sometimes that's the cost of doing business, as a consumer that is
I paid $8 ea for mine, and that's fine. I assumed that Astroboy payed the shipping to import a bulk order of them, and he's definitely got to make a couple bucks to make it worth his while. I have zero issues with that.
I used to sell oil seals for an obscure Yamaha motorcycle to other forum members, same kind of situation where there was a ridiculous shipping cost so I ordered a few dozen... Gotta make a few bucks to even be worth the hassle.
Get 'em while they're hot!
My Heatware!.Flateric wrote: Black ABS, weak part, bizzare holes, bad layer adhesion, loss of details. Loss of sanity.
Re: vibration dampers on clearance
Knowing Steve, they probably bought 1000 of the bloody things.
g.
g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
- astroboy907
- Printmaster!
- Posts: 150
- Joined: Mon Jul 08, 2013 4:09 pm
Re: vibration dampers on clearance
No wonder I haven't been able to get any stock!geneb wrote:Knowing Steve, they probably bought 1000 of the bloody things.
g.
My Heatware!.Flateric wrote: Black ABS, weak part, bizzare holes, bad layer adhesion, loss of details. Loss of sanity.
- Jimustanguitar
- ULTIMATE 3D JEDI
- Posts: 2631
- Joined: Sun Mar 31, 2013 1:35 am
- Location: Notre Dame area
- Contact:
Re: vibration dampers on clearance
Sounds like you found your new supplier in the statesastroboy907 wrote:No wonder I haven't been able to get any stock!
Re: vibration dampers on clearance
Holy frick, I got my set of dampers in last night and had some time to install them this morning, and the difference is ABSURD. The hotend fan is now by far the loudest thing part of my printer. Seriously, the motor are almost 100% silent now, it's crazy!
- Eaglezsoar
- ULTIMATE 3D JEDI
- Posts: 7185
- Joined: Sun Apr 01, 2012 5:26 pm
Re: vibration dampers on clearance
I bet they sell them all!geneb wrote:Knowing Steve, they probably bought 1000 of the bloody things.
g.
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”
Re: vibration dampers on clearance
Glad I'm not the only one who thinks so.Glacian22 wrote:Holy frick, I got my set of dampers in last night and had some time to install them this morning, and the difference is ABSURD. The hotend fan is now by far the loudest thing part of my printer. Seriously, the motor are almost 100% silent now, it's crazy!
Current Machines || Rostock Max (V1) | V3DR ||
Previous Machines || Flashforge Creator Pro ||
Previous Machines || Flashforge Creator Pro ||
Re: vibration dampers on clearance
It's hard to describe the difference until you do it.
My one little contribution to the overall 3d printer universe.
"Now you see why evil will always triumph! Because good is dumb." - Spaceballs
Re: vibration dampers on clearance
Looks like they are now sold out.
Current Machines || Rostock Max (V1) | V3DR ||
Previous Machines || Flashforge Creator Pro ||
Previous Machines || Flashforge Creator Pro ||
Re: vibration dampers on clearance
hahahaha, yeah, they're gone. Astroboy, sorry to steal the thunder temporarily, we're out now, so you should be back in business . Geneb, yes, almost! You know steve never buys just what he needs to test stuff, you've seen the hoards! I know we didn't make money on these, just trying to clean out some shop space.
Wonder what i'll find next that partdaddy says i can sell? Any requests? lol
Wonder what i'll find next that partdaddy says i can sell? Any requests? lol
- astroboy907
- Printmaster!
- Posts: 150
- Joined: Mon Jul 08, 2013 4:09 pm
Re: vibration dampers on clearance
No problemo! You actually stepped in at the right time - I've been out of stock until today.johnoly99 wrote:hahahaha, yeah, they're gone. Astroboy, sorry to steal the thunder temporarily, we're out now, so you should be back in business . Geneb, yes, almost! You know steve never buys just what he needs to test stuff, you've seen the hoards! I know we didn't make money on these, just trying to clean out some shop space.
Wonder what i'll find next that partdaddy says i can sell? Any requests? lol
My Heatware!.Flateric wrote: Black ABS, weak part, bizzare holes, bad layer adhesion, loss of details. Loss of sanity.
Re: vibration dampers on clearance
You could ship me one of those Fadals and I wouldn't complain. I promise!
g.
g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects