Welcome to the SeeMeCNC Community

Hello All,

After some tests on various print bed materials I decided to do a full test on Filaprint.

All the results are in a Sheet that can be found here:https://docs.google.com/spreadsheets/d/ ... sp=sharing

Make sure to also read the Notes on the second tab.

Hope it is of use to you.

Lykle

Thanks for the info.

Thanks Lykle, you are a man after my own heart! I've made a lot of posts over the years about keeping records on filaments and print condition. Yin fact, it's #7 in my A Strategy for Successful (and Great) Prints post. I like he google doc spreadsheet though, makes it easier to share with others. I am going to have to think about how to move my notes over.

Oh dear, I made work for you.

But yes it was nice to read your notes and compare.
I have to admit, in my day to day printing I was am as thorough and conscientious as for these test results.

But working on it.

Lykle