Step-by-Step Video: Z Height & Arm Calibration for Orion

User-Generated tips and tricks for the Rostock Max, Orion, H1.1, or H1 Printers
Post Reply
User avatar
Brian.
Plasticator
Posts: 8
Joined: Thu May 15, 2014 10:15 pm

Step-by-Step Video: Z Height & Arm Calibration for Orion

Post by Brian. »

Made this video for more visual representation from the user manual. Hope it helps.

https://www.youtube.com/watch?v=Oe3qQcgMsZw" onclick="window.open(this.href);return false;
Top
geneb
ULTIMATE 3D JEDI
Posts: 5362
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:
Contact geneb

Re: Step-by-Step Video: Z Height & Arm Calibration for Orion

Post by geneb »

Well done!

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Top
User avatar
Brian.
Plasticator
Posts: 8
Joined: Thu May 15, 2014 10:15 pm

Re: Step-by-Step Video: Z Height & Arm Calibration for Orion

Post by Brian. »

Thanks Geneb. :)
Top
Post Reply

Return to “General Tips 'N Tricks”