Heater resistor value.

User-Generated tips and tricks for the Rostock Max, Orion, H1.1, or H1 Printers
Post Reply
hcdbey
Printmaster!
Posts: 47
Joined: Mon Jul 27, 2015 4:57 pm

Heater resistor value.

Post by hcdbey »

On a Rostock Max V2, I am concerned that one of the heater resistors may have failed. Can someone tell me what the value of each resistor should be so I can make check?

jjjohnson
SeeMeCNC Staff
Posts: 36
Joined: Sat Jun 02, 2012 9:31 am
Location: Goshen, Indiana

Re: Heater resistor value.

Post by jjjohnson »

Good Heating resistors = right around 4 ohms. Much greater than 4 ohms would mean you have one that has gone out.
JJ

Post Reply

Return to “General Tips 'N Tricks”