Welcome to the SeeMeCNC Community

Posted: **Thu Sep 17, 2015 1:50 pm**

On a Rostock Max V2, I am concerned that one of the heater resistors may have failed. Can someone tell me what the value of each resistor should be so I can make check?

Posted: **Thu Sep 17, 2015 4:00 pm**

Good Heating resistors = right around 4 ohms. Much greater than 4 ohms would mean you have one that has gone out.

Welcome to the SeeMeCNC Community

Heater resistor value.

Heater resistor value.

Re: Heater resistor value.