Max V2 hot end rebuilding?

Having a problem? Post it here and someone will be along shortly to help
Post Reply
User avatar
peterk
Prints-a-lot
Posts: 27
Joined: Sun Dec 20, 2015 6:51 pm

Max V2 hot end rebuilding?

Post by peterk »

Are there any options to rebuild/replace a badly working hot end on a Rostock Max V2. 0.5 nozzle is no longer available. Looks like the 280 extruder can not be used on the V2.
Top
geneb
ULTIMATE 3D JEDI
Posts: 5367
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:
Contact geneb

Re: Max V2 hot end rebuilding?

Post by geneb »

I would contact support and ask about the 0.5mm nozzles. They may have stock that's not added to the store.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Top
Post Reply

Return to “Troubleshooting”