Screen will not display
Posted: Mon Jun 29, 2020 4:01 pm
Hi all I am new here I just purchased a used Rostock Max V2! Unfortunately I have been having some issues with the screen.
Shortly after buying it the screen stopped displaying.
I replaced both fuses on the board and it work for about an hour until it stopped during calibration...
I replaced the top fuse again (labeled F3) and the screen turned on for a brief moment before going dark again...
Nothing seems to happen when I replace the other fuse
Additionally there is a light labeled R on the left of the board the continues to flash even when the printer is unplugged.
Any help is appreciated thank you!
Shortly after buying it the screen stopped displaying.
I replaced both fuses on the board and it work for about an hour until it stopped during calibration...
I replaced the top fuse again (labeled F3) and the screen turned on for a brief moment before going dark again...
Nothing seems to happen when I replace the other fuse
Additionally there is a light labeled R on the left of the board the continues to flash even when the printer is unplugged.
Any help is appreciated thank you!