bed stop heating after print start

Having a problem? Post it here and someone will be along shortly to help
Post Reply
dany muise
Plasticator
Posts: 5
Joined: Tue Oct 27, 2020 12:52 am

bed stop heating after print start

Post by dany muise »

Hi , i bought a rostock v2 used already assemble whit he280 hot end everything works, not fine tune yet but work.... problem is after i start the print, the bed stop heating up ,it work if i just heat up bed it will stay at desire temp as long as printer is on, it happen when i start printing, is anybody as that happen to them??HELP!!!!!
geneb
ULTIMATE 3D JEDI
Posts: 5197
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: bed stop heating after print start

Post by geneb »

It sounds to me like your slicing software has inserted a command to turn the bed heat off. What are you slicing with?

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
dany muise
Plasticator
Posts: 5
Joined: Tue Oct 27, 2020 12:52 am

Re: bed stop heating after print start

Post by dany muise »

cura 4.7
geneb
ULTIMATE 3D JEDI
Posts: 5197
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: bed stop heating after print start

Post by geneb »

I would look at the gcode output to see if there's a command that's turning the bed off.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Mac The Knife
ULTIMATE 3D JEDI
Posts: 1392
Joined: Sun May 11, 2014 6:18 pm

Re: bed stop heating after print start

Post by Mac The Knife »

perhaps " M140 S0"
R-Max V2
Eris
Folger Tech FT-5 R2
dany muise
Plasticator
Posts: 5
Joined: Tue Oct 27, 2020 12:52 am

Re: bed stop heating after print start

Post by dany muise »

i cant find anything that say turn off bed or anything like it:((
Mac The Knife
ULTIMATE 3D JEDI
Posts: 1392
Joined: Sun May 11, 2014 6:18 pm

Re: bed stop heating after print start

Post by Mac The Knife »

It would be a "M" code, or a "G" code. Could you do a copy/paste of the first 10 or so lines of one of the problem files?
R-Max V2
Eris
Folger Tech FT-5 R2
dany muise
Plasticator
Posts: 5
Joined: Tue Oct 27, 2020 12:52 am

Re: bed stop heating after print start.... solved

Post by dany muise »

hi ty for your time... problem solve ,my fault ,i reloaded firmware and put right value for power supply 2 instead of 1 end everything working find:))))\
just finish xyz test cube came out great:))) ty all
geneb
ULTIMATE 3D JEDI
Posts: 5197
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: bed stop heating after print start

Post by geneb »

\o/
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Post Reply

Return to “Troubleshooting”