Page 1 of 1

Rostock MAX Assembly, Github link!

Posted: Tue Mar 19, 2013 12:24 pm
by geneb
It took a loong time to get all this uploaded.

https://github.com/geneb/Rostock-MAX-Docs

If anyone wants to make changes or updates, you're welcome to! Either fork the docs or email me to give you write access to the repo (I'll need your github login name I suspect).

enjoy!

g.

Re: Rostock MAX Assembly, Github link!

Posted: Sat Dec 07, 2013 6:31 pm
by Bill Havins
Gene,

I had reason to access your latest version of the Rostock MAX Assembly Manual recently. And after having "busted your chops" some months ago, I must say you have done an excellent job with your continuing revisions! Bravo! Job well done.

You have said many times that the Rostock MAX is a "work in progress," and it truly is. If nothing else, I hope the folks at SeeMeCNC send you bottles of "headache relief" on a regular basis.

Thanks for keeping the manual as close to up to date as you do.

Bill

Re: Rostock MAX Assembly, Github link!

Posted: Sat Dec 07, 2013 6:59 pm
by geneb
You're quite welcome Bill. SeeMeCNC has been good to me, that's for sure. I almost feel like a Kept Geek. *laughs*

Check out the Orion manual if you get a chance. It's got info about Repetier-Host that's not (yet) covered in the Rostock MAX manual.

g.

Re: Rostock MAX Assembly, Github link!

Posted: Thu Apr 07, 2016 6:36 am
by Eaglezsoar
Gene, I noticed that the version of the assembly manual that is on the GitHub is version 1.67 aug 27 2014

The current version is Version 4.35, March 21st, 2016 and should be the version on the Github. I know that time
is a limiting factor for us all but I feel the Github is important and should be kept updated. Thanks!

Re: Rostock MAX Assembly, Github link!

Posted: Thu Apr 07, 2016 6:40 am
by Eaglezsoar
geneb wrote:You're quite welcome Bill. SeeMeCNC has been good to me, that's for sure. I almost feel like a Kept Geek. *laughs*

Check out the Orion manual if you get a chance. It's got info about Repetier-Host that's not (yet) covered in the Rostock MAX manual.

g.
SeeMeCNC has been good to all of us through the great support, the continued updating of the printers and we all owe them a vote of thanks
for keeping the price of all the printers at a price that the average hobbyist can afford.

Re: Rostock MAX Assembly, Github link!

Posted: Thu Apr 07, 2016 9:30 am
by geneb
The manuals are too large to store on GitHub - that's why they're not there. People should be going to the main SeeMeCNC website for the docs.

g.

Re: Rostock MAX Assembly, Github link!

Posted: Thu Apr 07, 2016 11:47 am
by KAS
Under the SeeMeCNC "Announcments" section of the forum, you should create a new topic with a link redirect.

Also fix the spelling of "Announcements" for that section and sub-forums :)

Re: Rostock MAX Assembly, Github link!

Posted: Thu Apr 07, 2016 3:16 pm
by Eaglezsoar
geneb wrote:The manuals are too large to store on GitHub - that's why they're not there. People should be going to the main SeeMeCNC website for the docs.

g.
Gene, I understand now, but the github is the most common download area for any site that has one and if they do not fit then a notation should be made as to where they can be found
and all of them removed so that someone doesn't download one that is too old.