"H-1 Mechanical Assembly Manual"
"H-1 Mechanical Assembly Manual"
Hey folks, here is the most current version of the H-1 Mechanical Assembly Manual (version 1.01). It has a few edits that folks have sent me. Please use this thread to ask questions, suggest edits, etc.
Here is a detailed breakdown of parts used in each step. Please provide feedback if you find differences or errors in this list so I can update it.
Cheers,
Michael
Here is a detailed breakdown of parts used in each step. Please provide feedback if you find differences or errors in this list so I can update it.
Cheers,
Michael
Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art
Start Here:
A Strategy for Successful (and Great) Prints
Strategies for Resolving Print Artifacts
The Eclectic Angler
-
- Printmaster!
- Posts: 101
- Joined: Mon Mar 26, 2012 5:07 pm
- Location: Ariel, WA
Re: "H-1 Mechanical Assembly Manual"
Great, thanks for testing that Dave.
cheers,
Michael
cheers,
Michael
Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art
Start Here:
A Strategy for Successful (and Great) Prints
Strategies for Resolving Print Artifacts
The Eclectic Angler
Re: "H-1 Mechanical Assembly Manual"
On page 8 where it says 30318 M3-.05 x 10mm Phillip Pan Head Screw is it really .05 size or is it .5 because .05 is unrealisticly small and nobody caries those from what i have been told.
Re: "H-1 Mechanical Assembly Manual"
AndGorew, you are most likely correct. All of the exploded parts diagrams have M3-.05 so those will all have to be changed too.
Interesting, if you search for M3-.05 you will find dozens of pages with this same error, even charts that have M2.5 x .45 then M3 x .05 and back to M3.5 x .6 - mix and match (see Imperial chart).
I'll work with Steve on getting these updated.
thanks,
Michael
Interesting, if you search for M3-.05 you will find dozens of pages with this same error, even charts that have M2.5 x .45 then M3 x .05 and back to M3.5 x .6 - mix and match (see Imperial chart).
I'll work with Steve on getting these updated.
thanks,
Michael
Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art
Start Here:
A Strategy for Successful (and Great) Prints
Strategies for Resolving Print Artifacts
The Eclectic Angler
-
- Printmaster!
- Posts: 101
- Joined: Mon Mar 26, 2012 5:07 pm
- Location: Ariel, WA
Re: "H-1 Mechanical Assembly Manual"
3mm course thread has a pitch of .5mm not .05 so it should read M3X.5
Dave Sohlstrom
H-1 Tank
H-1 Tank
Re: "H-1 Mechanical Assembly Manual"
Yes, Steve is going to update all of the diagrams and I'll make the changes and repost as soon as they are done.
cheers,
Michael
cheers,
Michael
Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art
Start Here:
A Strategy for Successful (and Great) Prints
Strategies for Resolving Print Artifacts
The Eclectic Angler
update: "H-1 Mechanical Assembly Manual"
I posted an update to the pinned post to include an attachment. It is an Excel spreadsheet with a detailed breakdown of parts used in each step. Please provide feedback if you find differences or errors in this list so I can update it.
regards,
Michael
regards,
Michael
Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art
Start Here:
A Strategy for Successful (and Great) Prints
Strategies for Resolving Print Artifacts
The Eclectic Angler
Re: "H-1 Mechanical Assembly Manual"
In the assembly guide it has a "need photo here" for the hot end and thermister wiring, is it posted somewhere?
Re: "H-1 Mechanical Assembly Manual"
Not yet but there is some info on wiring the thermistor and resistors in the build threads section. It is pretty straight forward, all the photo is going to do is show how to route the wires so they do not short or interfere.
Regards,
Michael
Regards,
Michael
Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art
Start Here:
A Strategy for Successful (and Great) Prints
Strategies for Resolving Print Artifacts
The Eclectic Angler
Re: "H-1 Mechanical Assembly Manual"
N00b alert. Does this manual cover the H1.1 release? (Just want to be sure before I send to my inkjet printer )
Thanks!
Thanks!
Re: "H-1 Mechanical Assembly Manual"
Not yet. I'm waiting for my kit in order to do the manuals.
Cheers,
Michael
Cheers,
Michael
Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art
Start Here:
A Strategy for Successful (and Great) Prints
Strategies for Resolving Print Artifacts
The Eclectic Angler
Re: "H-1 Mechanical Assembly Manual"
mhackney, you've got mail (the snail mail kind though, should be getting your "present" soon)
Re: "H-1 Mechanical Assembly Manual"
Excellent, thanks. I'll let you know when it arrives.
Chefs,
Michael
Chefs,
Michael
Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art
Start Here:
A Strategy for Successful (and Great) Prints
Strategies for Resolving Print Artifacts
The Eclectic Angler