If you have a Delta printer you are going to want to see this video!
The BerryBot3D Thermal Containment Accessory is use to minimize warpage when printing with ABS. This video talks about a simple way to make a thermal chamber for use on a Delta Printer. I perform a test on a real world functional part, with and without the use of thermal containment. This test shows a significant difference in dimensional accuracy when printing ABS using thermal containment. Please comment and give thumbs up if you like it!
http://youtu.be/kw8QQ1GY9Uw
Happy printing!
Werner
Delta Printer Thermal Containment Accessory
Re: Delta Printer Thermal Containment Accessory
since your machine is mostly aluminum, you could just enclose the whole thing in a heated chamber.
My rostock build log http://forum.seemecnc.com/viewtopic.php?f=42&t=1228
Re: Delta Printer Thermal Containment Accessory
I've got an enclosure on my todo list - essentially it's just a length of the right diameter Sonotube with an acrylic half-arc door and a cutout for the LCD.
g.
g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Re: Delta Printer Thermal Containment Accessory
Hey Cambo, Yeah I was thinking I could just build another BerryBot3D for ABS but I am having so much fun with PLA I think it will be awhile before I mess with it.
Gene, would your go all the way up to the top of your machine?
Happy printing!
Werner
Gene, would your go all the way up to the top of your machine?
Happy printing!
Werner
Re: Delta Printer Thermal Containment Accessory
I'm curious if a similar positive effect could be achieved through the use of a reptile heater lamp and or combination of lamp with an enclosure. This would allow unobstructed view of the build surface and no potential weight added on the effector.
Perhaps even just a small amount of captured heat is all that would be required for good gains?
(almost forgot, the red BIG devil woman is here and says to say hello Berry! I'm still up for a trade.)
Perhaps even just a small amount of captured heat is all that would be required for good gains?
(almost forgot, the red BIG devil woman is here and says to say hello Berry! I'm still up for a trade.)
"Now you see why evil will always triumph! Because good is dumb." - Spaceballs
- bvandiepenbos
- Printmaster!
- Posts: 927
- Joined: Thu Apr 05, 2012 11:25 pm
- Location: Goshen, IN
- Contact:
Re: Delta Printer Thermal Containment Accessory
Nice work Werner. you are so clever.
I wonder if this clear storage cover I made would work to contain some heat.? Thought about it a few months ago, I have not had time to try it.
http://www.tricklaser.com/Storage-and-t ... RM-BAG.htm
I wonder if this clear storage cover I made would work to contain some heat.? Thought about it a few months ago, I have not had time to try it.
http://www.tricklaser.com/Storage-and-t ... RM-BAG.htm
~*Brian V.
RostockMAX v2 (Stock)
MAX METAL "ShortyMAX"
MAX METAL Rostock MAX Printer Frame
NEMESIS Air Delta v1 & v2 -Aluminum delta printers
Rostock MAX "KITT" - Tri-Force Frame
GRABER i3 "Slim"
RostockMAX v2 (Stock)
MAX METAL "ShortyMAX"
MAX METAL Rostock MAX Printer Frame
NEMESIS Air Delta v1 & v2 -Aluminum delta printers
Rostock MAX "KITT" - Tri-Force Frame
GRABER i3 "Slim"
Re: Delta Printer Thermal Containment Accessory
Yes, the Sonotube would be full eight and have a "lid" on the top of it.
g.
g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
-
- Printmaster!
- Posts: 94
- Joined: Thu Mar 14, 2013 7:38 pm
Re: Delta Printer Thermal Containment Accessory
What would be the ideal chamber temp for PLA and ABS?
Re: Delta Printer Thermal Containment Accessory
Perhaps like this:bvandiepenbos wrote:Nice work Werner. you are so clever.
I wonder if this clear storage cover I made would work to contain some heat.? Thought about it a few months ago, I have not had time to try it.
http://www.tricklaser.com/Storage-and-t ... RM-BAG.htm
http://tightwadtechnica.com/wp-content/ ... ilence.jpg
Technologist, Maker, Willing to question conventional logic
http://dropc.am/p/KhiI1a" onclick="window.open(this.href);return false;
http://dropc.am/p/KhiI1a" onclick="window.open(this.href);return false;
- foshon
- Printmaster!
- Posts: 605
- Joined: Fri Mar 08, 2013 3:05 pm
- Location: Just to the right of SeeMeCNC
Re: Delta Printer Thermal Containment Accessory
lol
Purple = sarcasm
Please do a board search before posting your question, many have been answered with very time consuming detail already.
Please do a board search before posting your question, many have been answered with very time consuming detail already.