Page 1 of 1
Zesty Nimble on 713Maker Mount NinjaFlex First Print
Posted: Tue Jun 06, 2017 10:06 pm
by gchristopher
Just got the Zesty Nimble up and running on a V2 with 713Maker effector plate and mount, Berd-Air, IR Probe and E3D V6. It's not remotely tuned yet, but everything seems to be working together and the first try at a Ninjaflex print was successful.
Go Dinosaurs!
[img]
http://gchristopher.net/3dprinting/firs ... _print.jpg[/img]
Not sure if the built-in youtube embedding will work, so links included.
Print in progress:
[youtube]
http://www.youtube.com/watch?v=9DUHsa61vbc[/youtube]
Testing the flexibility of the finished print. 0% infill.
[youtube]
http://www.youtube.com/watch?v=YMynhUNYPhM[/youtube]
Re: Zesty Nimble on 713Maker Mount NinjaFlex First Print
Posted: Wed Jun 07, 2017 12:47 pm
by DeltaCon
I get errors playing those video's... Are you sure they are shared publicly?
EDIT:
Oh, just saw the hyperlinks, they do work... I now remember that this forum has a lot of trouble with youtube links...
Re: Zesty Nimble on 713Maker Mount NinjaFlex First Print
Posted: Sun Jun 11, 2017 10:23 pm
by gchristopher
A first try with Bronzefill. 0.25mm nozzle. It actually shines up pretty well if you finish with a buffing tool!
[img]
http://gchristopher.net/3dprinting/polished_owl.jpg[/img]
Re: Zesty Nimble on 713Maker Mount NinjaFlex First Print
Posted: Tue Jun 13, 2017 1:50 pm
by barry99705
Rex always looks amazed at the printer. Imagine showing him VR goggles. His little head would explode!
Re: Zesty Nimble on 713Maker Mount NinjaFlex First Print
Posted: Tue Jun 13, 2017 3:55 pm
by gchristopher
Haha, yeah, gotta be careful with Tyrannosaurus brains. They are definitely excitable.
Re: Zesty Nimble on 713Maker Mount NinjaFlex First Print
Posted: Mon Jun 19, 2017 4:15 pm
by ramai
Since you got your nimble up and running, maybe you can help me. I'm using the rambo that comes stock on the romax. What setting did you end up using for your micro stepping? And how did you adjust the vref setting? Thanks!
Re: Zesty Nimble on 713Maker Mount NinjaFlex First Print
Posted: Mon Jun 19, 2017 11:50 pm
by gchristopher
Sorry, my RAMBo died (well, the reprogramming part of it died) and I had to replace it with a Duet Wifi.
Re: Zesty Nimble on 713Maker Mount NinjaFlex First Print
Posted: Wed Jun 21, 2017 2:59 pm
by Zesty_Lykle
@Ramai, I hope you have checked out the documentation site we have for the Nimble?
http://zestytechnology.readthedocs.io
We spoke on the chat channel, so I think you have the settings sorted now, yes?
Lykle
Re: Zesty Nimble on 713Maker Mount NinjaFlex First Print
Posted: Wed Jun 21, 2017 3:27 pm
by ramai
Yep, I made a successful print. I am working on a post that will help others with a rostock max get it up and running.
Re: Zesty Nimble on 713Maker Mount NinjaFlex First Print
Posted: Wed Jun 21, 2017 4:25 pm
by ramai
