Page 1 of 1

First layer multicolor tuning

Posted: Sun Jul 30, 2017 7:04 pm
by Twac1
Love the possibilities! Sure makes first layer tuning even more challenging

Re: First layer multicolor tuning

Posted: Mon Jul 31, 2017 8:14 am
by Jimustanguitar
Looks really good! Tell us some more about your process. Using the SeeMeCNC Y adapter, or something else? What software is making your GCode?

Re: First layer multicolor tuning

Posted: Mon Jul 31, 2017 9:25 am
by Twac1
Yes the y conector. And matter control. I use a 45mm purge tower, no retraction, top speed of 35mms, first layer is set at 75% to get good detail. PLA/PHA filliment. As you can see i am still trying to adjust my retract settings, small track marks show through. but am having trouble keeping the first layer clean and crisp with any at all.