PartDaddy Screwdriver

[PartDaddy]

Hello everyone,

I'm printing LIVE on our Ustream channel http://ustream.tv/channel/seemecnc.

I whipped this up the other day. I'll upload STL soon. Ever since Oly showed me that useful "Stubby Screwdriver" he printed from Thingiverse, I wanted to make a full size screwdriver.

This PartDaddy Screwdriver holds the "stubby screwdriver" in the handle. Then the stubby screwdriver retains bit-storage within the handle.

Here's a Solidworks graphic image of the screwdriver

PartDaddy Screwdriver holds "Stubby Screwdriver" from Thingiverse

With some advice from Oly, I'm printing using the following details:
The Slic3r configuration file:

ScrewDriver_3mm_Filament_020_nozzle.ini

Slic3r config file for PartDaddy Screwdriver using 3mm filament

(1.45 KiB) Downloaded 249 times

~PartDaddy

[PartDaddy]

Here's the STL of the PartDaddy "SeeMeCNC" screwdriver.

PartDaddyScrewDriver.STL

This is the STL file for PartDaddy Screwdriver.

(1.37 MiB) Downloaded 252 times

[bvandiepenbos]

Cool! I am going to print one of these.
~*Brian V

[michaellatif]

That looks cool! I have to get my machine back up and running, too many upgrades at once .

[bvandiepenbos]

Hey Partdaddy,

Slic3r won't process your screwdriver.

[johnoly99]

Brian, try scaling by 25.4 in slic3r. Alot of times thats the problem.

[PartDaddy]

Unless I made a mistake, i'm trying to save all my STL's in Metric, so scale of 1 should be correc in Slic3r. I am also keeping mu STL resolution higher so people can print more accurately with less faceting.