My son drew this up and we printed it last night. Fit just right the first try!
Wife was very impressed
Beefed up design with fillets and extra ribs, should last longer than the OEM part.
This little lever folds up to hold strainer in place while banging out the coffee grounds puck. Keeps you from burning your finger on the metal.
( De'Longhi EC155 - Coffee machine with cappuccinatore - 15 bar )
Replacement lever for cappuccino maker handle
- bvandiepenbos
- Printmaster!
- Posts: 927
- Joined: Thu Apr 05, 2012 11:25 pm
- Location: Goshen, IN
- Contact:
Replacement lever for cappuccino maker handle
~*Brian V.
RostockMAX v2 (Stock)
MAX METAL "ShortyMAX"
MAX METAL Rostock MAX Printer Frame
NEMESIS Air Delta v1 & v2 -Aluminum delta printers
Rostock MAX "KITT" - Tri-Force Frame
GRABER i3 "Slim"
RostockMAX v2 (Stock)
MAX METAL "ShortyMAX"
MAX METAL Rostock MAX Printer Frame
NEMESIS Air Delta v1 & v2 -Aluminum delta printers
Rostock MAX "KITT" - Tri-Force Frame
GRABER i3 "Slim"
- michaellatif
- Printmaster!
- Posts: 357
- Joined: Mon Mar 26, 2012 1:34 pm
- Location: RTP, NC
Re: Replacement lever for cappuccino maker handle
That is awesome!
I love it that you can fabricate a part to repair something in a matter of minutes (well...perhaps a lot of minutes).
I love it that you can fabricate a part to repair something in a matter of minutes (well...perhaps a lot of minutes).
Anthony Leander
Running the Creeper Creator
Running the Creeper Creator
- bvandiepenbos
- Printmaster!
- Posts: 927
- Joined: Thu Apr 05, 2012 11:25 pm
- Location: Goshen, IN
- Contact:
Re: Replacement lever for cappuccino maker handle
ALeander wrote:That is awesome!
I love it that you can fabricate a part to repair something in a matter of minutes (well...perhaps a lot of minutes).
Thank you guys for the compliments.
I enjoyed working with my son and making something truly useful.
Print time was 15 minutes. probably 3 hours in design/draw/convert/setup.
~*Brian
~*Brian V.
RostockMAX v2 (Stock)
MAX METAL "ShortyMAX"
MAX METAL Rostock MAX Printer Frame
NEMESIS Air Delta v1 & v2 -Aluminum delta printers
Rostock MAX "KITT" - Tri-Force Frame
GRABER i3 "Slim"
RostockMAX v2 (Stock)
MAX METAL "ShortyMAX"
MAX METAL Rostock MAX Printer Frame
NEMESIS Air Delta v1 & v2 -Aluminum delta printers
Rostock MAX "KITT" - Tri-Force Frame
GRABER i3 "Slim"
Re: Replacement lever for cappuccino maker handle
You are quite welcome.
Looking forward to more of your designs.
Once I get my printer back together after the bearing upgrade I need to print some more clips for another probe plate at work and of course my son wants more Creepers for his friends at school. I must have printed more than a half dozen of those guys already, time to print some hearts for my daughter.
What a wonderful machine these are.
Looking forward to more of your designs.
Once I get my printer back together after the bearing upgrade I need to print some more clips for another probe plate at work and of course my son wants more Creepers for his friends at school. I must have printed more than a half dozen of those guys already, time to print some hearts for my daughter.
What a wonderful machine these are.
Anthony Leander
Running the Creeper Creator
Running the Creeper Creator
Re: Replacement lever for cappuccino maker handle
Nice print Brian
~PartDaddy
SeeMeCNC Owner & Founder
Blackpoint Engineering is SeeMeCNC
Since 1996
SeeMeCNC Owner & Founder
Blackpoint Engineering is SeeMeCNC
Since 1996