Extrude3D's H-1 Build
Re: Extrude3D's H-1 Build
Update: Purchased a H-1 Configuration Kit (Sans everything), update will be made when it ships and arrives.
Work will not start until memorial day break OR June 20-something. I need to finish this school year, then focus on my printer
Work will not start until memorial day break OR June 20-something. I need to finish this school year, then focus on my printer
-Extrude3D/Brent
-
michaellatif
- Printmaster!
- Posts: 357
- Joined: Mon Mar 26, 2012 1:34 pm
- Location: RTP, NC
Re: Extrude3D's H-1 Build
You say that now. Wait until you get the kit. It will drive you mad not being able to open the box and start assembling. . . good luck! 
Mike Latif
H-1 #3
H-1 #3
Re: Extrude3D's H-1 Build
Micro Update:
*Kit Arrives in 3 Days
*Purchased ball bearings
*Buildlog logo is below.
[img]http://i.imgur.com/SNcDo.png[/img]
*Kit Arrives in 3 Days
*Purchased ball bearings
*Buildlog logo is below.
[img]http://i.imgur.com/SNcDo.png[/img]
-Extrude3D/Brent
Re: Extrude3D's H-1 Build
Got almost all my ingredients:
*6 NEMA 17 High Torque Steppers [I bought 6, only need four for the build.
*H-1 Kit
*Ball Bearings Kit
Total So Far: $250
*6 NEMA 17 High Torque Steppers [I bought 6, only need four for the build.
*H-1 Kit
*Ball Bearings Kit
Total So Far: $250
-Extrude3D/Brent
Re: Extrude3D's H-1 Build
ahh lucky , i cant wait for mine.
Re: Extrude3D's H-1 Build
My kit arrived on May 31 at the time of the academic tests. However, my work is already well advanced. Now comes the part of Mach3 and settings that can be more complex. Good job to all.