So much fun!

Start your own build thread so others can see how it's going, and even help out!
Post Reply
zubrug
Plasticator
Posts: 5
Joined: Fri Jul 11, 2014 5:02 pm

So much fun!

Post by zubrug »

IMG_20140804_114933.jpg
IMG_20140726_201047.jpg
IMG_20140723_134919.jpg
IMG_20140727_195002.jpg
IMG_20140723_231034.jpg
Finally, one tornado later, its alive.
Here are some pictures of the trip.

This has been so much fun. Been printing nonstop, trying out all the slicers, giving matter control a try at the moment.
Had an issue with one end stop, wring issue.
Had to re-solder the rambo fan, could it be smaller. (watched the video on soldering the LCD panel attachment, I should not complain.)
:D ;)

brent
Printmaster!
Posts: 247
Joined: Fri Dec 06, 2013 10:24 pm
Location: Mass.

Re: So much fun!

Post by brent »

That tornado really tore those threes apart, holy cow! I'm glad you're having a good time with the machine.

geneb
ULTIMATE 3D JEDI
Posts: 5148
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: So much fun!

Post by geneb »

If you think the threes got it bad, you should see the fours.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

User avatar
barry99705
Printmaster!
Posts: 707
Joined: Sun Aug 11, 2013 6:10 pm
Location: west ohio

Re: So much fun!

Post by barry99705 »

geneb wrote:If you think the threes got it bad, you should see the fours.

g.

Hahahahahaha!
Never do anything you don't want to have to explain to the paramedics.

Post Reply

Return to “The Build Zone”