Some Noobs Need Help

Start your own build thread so others can see how it's going, and even help out!
Post Reply
engineeringsquad
Plasticator
Posts: 11
Joined: Thu Nov 12, 2015 3:29 pm

Some Noobs Need Help

Post by engineeringsquad »

We're pretty far along with the building process, and we've noticed we have a couple of tiny fans. We've looked at multiple sets of instructions, and there's nothing about them in there. We are building a Rostock Max V2... Help? :)
Top
geneb
ULTIMATE 3D JEDI
Posts: 5365
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:
Contact geneb

Re: Some Noobs Need Help

Post by geneb »

You'll get to the tiny fans in the User Guide. :)

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Top
engineeringsquad
Plasticator
Posts: 11
Joined: Thu Nov 12, 2015 3:29 pm

Re: Some Noobs Need Help

Post by engineeringsquad »

geneb wrote:You'll get to the tiny fans in the User Guide. :)

g.
Thanks! :D
Top
User avatar
Windshadow
Printmaster!
Posts: 526
Joined: Mon Nov 30, 2015 6:35 pm
Location: Mid Coast Maine

Re: Some Noobs Need Help

Post by Windshadow »

put a dab of hot glue on the layer fan wires where they come out of the fan itself. mine fatigue broke right at that spot after about 35 hours of printing
Top
User avatar
Eaglezsoar
ULTIMATE 3D JEDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: Some Noobs Need Help

Post by Eaglezsoar »

Windshadow wrote:put a dab of hot glue on the layer fan wires where they come out of the fan itself. mine fatigue broke right at that spot after about 35 hours of printing
Good Tip! :)
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”
Top
Post Reply

Return to “The Build Zone”