external motor for rambo board

The RAMBo board is finally here, and here's a place to talk about it!
Post Reply
jinglan586
Noob
Posts: 1
Joined: Sun Feb 02, 2020 4:51 pm

external motor for rambo board

Post by jinglan586 »

Hi everyone,

I want to add two stepper motors on rambo board. There is a 3*5pins named "motor ext" on the board. Where can I find some instructions for it? Such as code files, adapters, cables etc. I have some NEMA 4-pins motors. How can I connect them with 3*5pins?

Thanks.
Attachments
48-0.jpg
geneb
ULTIMATE 3D JEDI
Posts: 5362
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: external motor for rambo board

Post by geneb »

The RAMBo board only supports stepper motors on the existing connectors along the bottom edge of the board - there's no more stepper driver chips for more than that.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Post Reply

Return to “RAMBo”