Config file for Repetier firmware builder

The RAMBo board is finally here, and here's a place to talk about it!
Post Reply
User avatar
Jimustanguitar
ULTIMATE 3D JEDI
Posts: 2631
Joined: Sun Mar 31, 2013 1:35 am
Location: Notre Dame area
Contact:

Config file for Repetier firmware builder

Post by Jimustanguitar »

Has anyone created a config file for using Repetier's firmware builder on the website? I'd love to play around with V.092 and keep up with the more current revisions.

http://www.repetier.com/firmware/v092/index.html" onclick="window.open(this.href);return false;

I'm currently running "stock" Rambo electronics, and would love to have a starting point to jump off of.
User avatar
briankb
Printmaster!
Posts: 106
Joined: Thu Jun 13, 2013 11:50 am
Location: North Florida - USA
Contact:

Re: Config file for Repetier firmware builder

Post by briankb »

I second this request.
- CNC's: Rostock Max upgraded to v3.2, Prusa i3 MK3 MMU, Formlabs Form SLA, Shapeoko3 CNC, Palette+, Palette 2 Pro
- Software: Fusion 360, SpaceClaim Engineer, Simplify3D, Repetier Firmware & Host, VCarve Pro
User avatar
Nylocke
ULTIMATE 3D JEDI
Posts: 1421
Joined: Sun Jun 23, 2013 1:43 pm
Location: Iowa

Re: Config file for Repetier firmware builder

Post by Nylocke »

I posted one in my build log. You'll need to scroll down a bit http://forum.seemecnc.com/viewtopic.php ... &start=175" onclick="window.open(this.href);return false;

Let me know if anything needs changed
User avatar
Nylocke
ULTIMATE 3D JEDI
Posts: 1421
Joined: Sun Jun 23, 2013 1:43 pm
Location: Iowa

Re: Config file for Repetier firmware builder

Post by Nylocke »

Known working config file. Just rename to configuration.h
Attachments
Configuration-2.h
(23.98 KiB) Downloaded 327 times
User avatar
Jrjones
Printmaster!
Posts: 106
Joined: Mon Nov 24, 2014 6:09 pm

Re: Config file for Repetier firmware builder

Post by Jrjones »

How do you set the Z height with v0.92.3 ? I swear I saw it briefly in the LCD menu, but can't find it anymore.

I've got it set via the EEPROM but its far easier to adjust it via the LCD.
User avatar
Jimustanguitar
ULTIMATE 3D JEDI
Posts: 2631
Joined: Sun Mar 31, 2013 1:35 am
Location: Notre Dame area
Contact:

Re: Config file for Repetier firmware builder

Post by Jimustanguitar »

Jrjones wrote:How do you set the Z height with v0.92.3 ? I swear I saw it briefly in the LCD menu, but can't find it anymore.

I've got it set via the EEPROM but its far easier to adjust it via the LCD.
Not sure about which exact version I'm running, but on mine it's: click, scroll to advanced settings at the bottom, click, scroll to set z height at the bottom.

So go to the bottom of the menu list, two layers deep, and you'll find it there.
User avatar
Jrjones
Printmaster!
Posts: 106
Joined: Mon Nov 24, 2014 6:09 pm

Re: Config file for Repetier firmware builder

Post by Jrjones »

Ah, I got it.

I had changed the Z_HOME_DIR to 0 because I thought it was making the carriages move up into the limit switches after homing. But it also turns off the Z Calibration menu if its set to zero.
Post Reply

Return to “RAMBo”