RotoMAAK rotational Casting

General hangout discussion area for other non-printing stuff
Navkram
Printmaster!
Posts: 48
Joined: Thu Apr 11, 2013 10:30 pm

RotoMAAK rotational Casting

Post by Navkram »

Here is the rotational casting machine that I have built. I made this machine to fill a need I had in making multiple copies of salesman samples, took it to Detroit maker faire and go many people asking where I got it , I never really at that point intended to Mfg. these, but demand I have heard over the past 6 months I have went ahead and decided to sell these.
A few people from here has seen this in person and also commented on the design and a definite need that it can bridge between 1 off printing and making faster copies of it to mass producing with injection molds etc.
take a look and pass it on to everyone you know .
http://www.rotomaak.com

thanks
MArk
User avatar
joecnc2006
Printmaster!
Posts: 148
Joined: Tue May 14, 2013 11:42 am

Re: RotoMAAK rotational Casting

Post by joecnc2006 »

Very Nice, This would be a great addition for people to do small production runs as you mentioned. I have to save my penny now. :)
Joe
http://www.joescnc.com" onclick="window.open(this.href);return false;
johnoly99
Printmaster!
Posts: 709
Joined: Mon Mar 26, 2012 1:07 pm
Location: Goshen, IN

Re: RotoMAAK rotational Casting

Post by johnoly99 »

Dang dude! Already at almost $4k and you just emailed me that it went live at 8pm! I bet i know someone who's gonna be busy building stuff this sprint :D
User avatar
mhackney
ULTIMATE 3D JEDI
Posts: 5391
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: RotoMAAK rotational Casting

Post by mhackney »

Very cool and the KickStarter video is printing the top of my Valentine Box! I'm famous!

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler
User avatar
Glacian22
Printmaster!
Posts: 330
Joined: Thu Apr 04, 2013 6:07 am
Location: Seattle

Re: RotoMAAK rotational Casting

Post by Glacian22 »

This looks like a really great device, I can see it being incredibly useful!
User avatar
mhackney
ULTIMATE 3D JEDI
Posts: 5391
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: RotoMAAK rotational Casting

Post by mhackney »

I'm in for the laser cut kit. That way I'll get it early and can be molding sooner! I've been making silicone molds and casting for a few years and the ability to make hollow parts is too cool to pass up! Great idea.

cheers,
Michael

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler
Navkram
Printmaster!
Posts: 48
Joined: Thu Apr 11, 2013 10:30 pm

Re: RotoMAAK rotational Casting

Post by Navkram »

Thank you michael.
User avatar
mhackney
ULTIMATE 3D JEDI
Posts: 5391
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: RotoMAAK rotational Casting

Post by mhackney »

I'm looking forward to it, very cool machine. I have a few parts for my fly fishing reels that would be great cast. One question - shrinkage with solid cast parts is an issue although some of the resins are very low shrinkage. It seems that this technology would insure the surface / exterior is spot on. Is that the case?

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler
Navkram
Printmaster!
Posts: 48
Joined: Thu Apr 11, 2013 10:30 pm

Re: RotoMAAK rotational Casting

Post by Navkram »

I can measure a couple things tomorrow, we cast the bottles and that would be a great check. I know if you add micro baloons to solid cast it will help with shrink. I have not noticed shrinkage on hollow cast.
JD79
Plasticator
Posts: 14
Joined: Tue Mar 11, 2014 9:40 pm
Location: San Antonio, TX

Re: RotoMAAK rotational Casting

Post by JD79 »

Alright now I'm really going to need a big table for all my toys. I just ordered my Max v2 today and now I just backed your Kickstarter You are already at $ 4,801 in four hours.
-JD
Chrissi
Printmaster!
Posts: 157
Joined: Sat Feb 15, 2014 9:20 pm
Contact:

Re: RotoMAAK rotational Casting

Post by Chrissi »

Very nice!
Are there any rotational mold resins that would readily work in a lost plastic process where they'd turn to ash in a burn out oven?
...Chrissi
...Chrissi

Rostock MAX
http://www.CozyGirrrl.com" onclick="window.open(this.href);return false;
Eric
Printmaster!
Posts: 717
Joined: Sat Aug 18, 2012 4:09 am
Location: Chula Vista, CA

Re: RotoMAAK rotational Casting

Post by Eric »

That's very cool, I can see the time savings are huge.

I have no experience with the molding process, so my question is how do the material costs compare to 3d plastic? I realize that's a question with a lot of variables, so lets talk about the skull in your video. What is the cost of making the mold? What is the cost of making 10 roto-copies?
McSlappy
Printmaster!
Posts: 800
Joined: Wed Dec 11, 2013 9:11 pm
Location: Queensland, Australia
Contact:

Re: RotoMAAK rotational Casting

Post by McSlappy »

Wow I feel I'm in the company of even more awesome people every day!
I loved my Rostock so much I now sell them in Oz :)
User avatar
Tinyhead
Printmaster!
Posts: 439
Joined: Thu Jan 23, 2014 11:44 pm
Location: Ontario, Canada

Re: RotoMAAK rotational Casting

Post by Tinyhead »

Awesome idea. And the kickstarter page is off like a rocket! Nice work!
User avatar
Jimustanguitar
ULTIMATE 3D JEDI
Posts: 2608
Joined: Sun Mar 31, 2013 1:35 am
Location: Notre Dame area
Contact:

Re: RotoMAAK rotational Casting

Post by Jimustanguitar »

Chrissi wrote:Very nice!
Are there any rotational mold resins that would readily work in a lost plastic process where they'd turn to ash in a burn out oven?
...Chrissi
I'm sure you could put wax beads in the silicone mold and heat them up to melt the wax, and then just rotate the mold while it cools.

That's the cool thing about this, there are so many possibilities that it'll take a creative community like this just to figure out some of what's possible!
User avatar
JohnStack
Printmaster!
Posts: 839
Joined: Thu Jan 03, 2013 7:07 pm
Location: Carlsbad, CA
Contact:

Re: RotoMAAK rotational Casting

Post by JohnStack »

Great video, looking forward to you accomplishing your fundraising and getting these produced! The overall design is really simple to understand. It's a good fit for the maker! Great job! Glad I was able to see it firsthand at #MRRF
Technologist, Maker, Willing to question conventional logic
http://dropc.am/p/KhiI1a
Navkram
Printmaster!
Posts: 48
Joined: Thu Apr 11, 2013 10:30 pm

Re: RotoMAAK rotational Casting

Post by Navkram »

mhackney wrote:I'm looking forward to it, very cool machine. I have a few parts for my fly fishing reels that would be great cast. One question - shrinkage with solid cast parts is an issue although some of the resins are very low shrinkage. It seems that this technology would insure the surface / exterior is spot on. Is that the case?
Michael
Alumilite has been doing alot of experimenting and beta testing of the machine and I have a Corona bottle that they made a silicon mold off of and did a rotational cast off out of that mold and by the dimensions off the web they say that a corona bottle is 2 7/16 diameter at the label, I just measured this one that was cast and the diameter is 2.43 - 2.44 so I think the shrinkage is not a issue with rotational molding.
User avatar
mhackney
ULTIMATE 3D JEDI
Posts: 5391
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: RotoMAAK rotational Casting

Post by mhackney »

Great! My assumption was that rotational casting would produce higher dimensional accuracy since the resin is forced against the inside of the mold. Just wanted to validate that. Now I'm even more excited! I've sent the link to the KickStarter to a couple of friends that I thought might be interested.

cheers,
Michael

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler
Chrissi
Printmaster!
Posts: 157
Joined: Sat Feb 15, 2014 9:20 pm
Contact:

Re: RotoMAAK rotational Casting

Post by Chrissi »

Thanks Jimustanguitar... I was overthinking it :geek:
...Chrissi

Rostock MAX
http://www.CozyGirrrl.com" onclick="window.open(this.href);return false;
neurascenic
Printmaster!
Posts: 217
Joined: Fri Nov 15, 2013 10:05 pm
Location: Denver Colorado
Contact:

Re: RotoMAAK rotational Casting

Post by neurascenic »

Chrissi wrote:Thanks Jimustanguitar... I was overthinking it :geek:

PLA will burn out. if that is what you want to do, you could skip the whole Rotomolding. Unless you need multiple copies. But then there are injectors for wax.
I am a fool entrapped within my own wisdom.
Chrissi
Printmaster!
Posts: 157
Joined: Sat Feb 15, 2014 9:20 pm
Contact:

Re: RotoMAAK rotational Casting

Post by Chrissi »

Thanks, I am familiar with the wax injecting process, too much wax would be needed for what we have in mind. Many repeat parts but fairly large volumes so rotational casting might be the trick. We were going to go with printing PLA with low density fills but this would mean many long prints which up until recently we were concerned about prints quitting. Since going to a fan and better SD cards it has been running all day every day.
...Chrissi

Rostock MAX
http://www.CozyGirrrl.com" onclick="window.open(this.href);return false;
User avatar
Print_This
Printmaster!
Posts: 86
Joined: Sun Feb 23, 2014 11:56 pm

Re: RotoMAAK rotational Casting

Post by Print_This »

going to be a must have! great work!
--------------
If you survive chicago winters you can survive 3d printing!
User avatar
dbarrans
Printmaster!
Posts: 273
Joined: Thu Jan 03, 2013 4:14 am

Re: RotoMAAK rotational Casting

Post by dbarrans »

Who's going to be the first to use this for chocolate rabbits?

- dan
User avatar
Jimustanguitar
ULTIMATE 3D JEDI
Posts: 2608
Joined: Sun Mar 31, 2013 1:35 am
Location: Notre Dame area
Contact:

Re: RotoMAAK rotational Casting

Post by Jimustanguitar »

Could use the popular MIT rabbit.

Pink Panther Lady chocolate?

Owl looking left chocolate?

Calibration cube chocolate :)
User avatar
Eaglezsoar
ULTIMATE 3D JEDI
Posts: 7159
Joined: Sun Apr 01, 2012 5:26 pm

Re: RotoMAAK rotational Casting

Post by Eaglezsoar »

Jimustanguitar wrote:Could use the popular MIT rabbit.

Pink Panther Lady chocolate?

Owl looking left chocolate?

Calibration cube chocolate :)
When the first person takes the orders, I would like to order mine in the dark chocolate.
It's good for the heart!
Post Reply

Return to “The Lounge”