Looking for aviators

General hangout discussion area for other non-printing stuff
Post Reply
Chrissi
Printmaster!
Posts: 159
Joined: Sat Feb 15, 2014 9:20 pm
Contact:

Looking for aviators

Post by Chrissi »

Are there any aviators in this group with a v3.2 R-MAX?
...Chrissi

Rostock MAX
http://www.CozyGirrrl.com" onclick="window.open(this.href);return false;
User avatar
Outsider
Printmaster!
Posts: 75
Joined: Wed Nov 11, 2015 6:09 pm

Re: Looking for aviators

Post by Outsider »

Hi Chrissi,

I'm an x-avionics tech. I have watched you two build your plane over the years. I have E-racer plans/build manual and Berkut blueprints. My printer is an old R-max v2.0
Chrissi
Printmaster!
Posts: 159
Joined: Sat Feb 15, 2014 9:20 pm
Contact:

Re: Looking for aviators

Post by Chrissi »

Outsider wrote: Thu Feb 14, 2019 9:45 pm Hi Chrissi,

I'm an x-avionics tech. I have watched you two build your plane over the years. I have E-racer plans/build manual and Berkut blueprints. My printer is an old R-max v2.0
Going to Sun N Fun? Need a like minded plane nut with preferably a R-MAX of some flavor to run demos during the show. I called out a v3.2 just because of ease of setup.
The show is April 2-7 the week after MRRF.... it'll be warm down there =)
...Chrissi

Rostock MAX
http://www.CozyGirrrl.com" onclick="window.open(this.href);return false;
User avatar
Outsider
Printmaster!
Posts: 75
Joined: Wed Nov 11, 2015 6:09 pm

Re: Looking for aviators

Post by Outsider »

sorry, I'm in western Canada. That's a bit to far for me.
Post Reply

Return to “The Lounge”